With this commit, you can compile SDL2 with Emscripten
( http://emscripten.org/ ), and make your SDL-based C/C++ program
into a web app.
This port was due to the efforts of several people, including: Charlie Birks,
Sathyanarayanan Gunasekaran, Jukka Jylänki, Alon Zakai, Edward Rudd,
Bruce Mitchener, and Martin Gerhardy. (Thanks, everyone!)
--HG--
extra : rebase_source : 97af74c8a5121e926ebe89f123536b5dd6681695
This change does a few things, all with regards to the WinRT implementation of
SDL_GetPrefPath():
1. it fixes a bug whereby SDL_GetPrefPath() did not create the directory it
returned. On other SDL platforms, SDL_GetPrefPath() will create separate
directories for its 'org' and 'app' folders. Without this, attempts to create
files in the pref-path would fail, unless those directories were first created
by the app, or by some other library the app used. This change makes sure
that these directories get created, before SDL_GetPrefPath() returns to its
caller(s).
2. it defaults to having SDL_GetPrefPath() return a WinRT 'Local' folder
on all platforms. Previously, for Windows Store apps, it would have used a
different, 'Roaming' folder. Files in Roaming folders can be automatically,
and synchronized across multiple devices by Windows. This synchronization can
happen while the app runs, with new files being copied into a running app's
pref-path. Unless an app is specifically designed to handle this scenario,
there is a chance that save-data could be overwritten in unwanted or
unexpected ways.
The default is now to use a Local folder, which does not get synchronized, and
which is arguably a bit safer to use. Apps that wish to use Roaming folders
can do so by setting SDL_HINT_WINRT_PREF_PATH_ROOT to "roaming", however it
is recommended that one first read Microsoft's documentation for Roaming
files, a link to which is provided in README-winrt.md.
To preserve older pref-path selection behavior (found in SDL 2.0.3, as well as
many pre-2.0.4 versions of SDL from hg.libsdl.org), which uses a Roaming path
in Windows Store apps, and a Local path in Windows Phone, set
SDL_HINT_WINRT_PREF_PATH_ROOT to "old".
Please note that Roaming paths are not supported on Windows Phone 8.0, due to
limitations in the OS itself. Attempts to use this will fail.
(Windows Phone 8.1 does not have this limitation, however.)
3. It makes SDL_GetPrefPath(), when on Windows Phone 8.0, and when
SDL_HINT_WINRT_PREF_PATH_ROOT is set to "roaming", return NULL, rather than
silently defaulting to a Local path (then switching to a Roaming path if and
when the user upgraded to Windows Phone 8.1).
SDL_HINT_WINRT_PREF_PATH_ROOT allows WinRT apps to alter the path that
SDL_GetPrefPath() returns. Setting it to "local" uses the app's
OS-defined Local folder, setting it to "roaming" uses the app's OS-defined
Roaming folder.
Roaming folder support is not available in Windows Phone 8.0. Attempts to
make SDL_GetPrefPath() return a Roaming folder on this OS will be ignored.
Various bits of documentation on this were added to SDL_hints.h, and to
README-winrt.md
This adds support for all XInput devices, exposed through the SDL joystick API.
The button and axis reporting for XInput devices has been changed to match DirectInput and other platforms.
The game controller xinput mapping has been updated so this change is seamless.
There is a new hint, SDL_HINT_XINPUT_USE_OLD_JOYSTICK_MAPPING, for any applications that have hardcoded the old xinput button and axis set. This hint will be removed in SDL 2.1.
- SDL_WINDOW_FULLSCREEN works as always (change resolution, lock to window).
- SDL_WINDOW_FULLSCREEN_DESKTOP now puts the window in its own Space, and
hides the menu bar, but you can slide between Spaces and Command-Tab between
apps without the window minimizing, etc.
- SDL_WINDOW_RESIZABLE windows will get the new 10.7+ "toggle fullscreen"
window decoration and menubar item. As far as the app is concerned, this is
no different than resizing a window, but it gives the end-user more power.
- The hint for putting fullscreen windows into the Spaces system is gone,
since Spaces can't enforce the requested resolution. It's a perfect match
for FULLSCREEN_DESKTOP, though, so this is all automated now.
Pressing the hardware back button on a Windows Phone 8 device will now cause SDL to emit a pair of key-down and key-up events, with the SDL scancode, SDL_SCANCODE_AC_BACK.
By default, if WinRT's native back-button-press events are not explicitly marked as 'handled', then Windows Phone will terminate the app. More details on Microsoft's reasoning behind this can be found on MSDN, at http://msdn.microsoft.com/en-us/library/windowsphone/develop/jj247550(v=vs.105).aspx
To mark back-button-press events as 'handled', set SDL_HINT_WINRT_HANDLE_BACK_BUTTON to 1. Setting it to anything else will cause these events to not be marked as 'handled'.
Due to limitations in Windows Phone's APIs, SDL will emit a virtual key-up event immediately after the back button's key-down event is registered. Unfortunately, Windows Phone 8 only allows one to register for back-button-press events, and not back-button-release events.
This change is only relevant for Windows 8, 8.1, and RT apps, and only for those that are network-enabled. Such apps must feature a link to a privacy policy, which must be displayed via the Windows Settings charm. This is needed to pass Windows Store app-certification.
Using SDL_SetHint, along with SDL_HINT_WINRT_PRIVACY_POLICY_URL and optionally SDL_HINT_WINRT_PRIVACY_POLICY_LABEL, will cause SDL/WinRT to create a link inside the Windows Settings charm, as invoked from within an SDL-based app.
Network-enabled Windows Phone apps do not need to set this hint, and should provide some sort of in-app means to display their privacy policy. Microsoft does not appear to provide an OS-integrated means for displaying such on Windows Phone.
The reasoning behind this change is that source2 in -tools mode has a single OpenGL context that is used with multiple different windows. Some of those windows are created outside the engine (i.e. with Qt) and therefore we need to use SDL_CreateWindowFrom() to get an SDL_Window for those. The requirement for sharing an OpenGL context across multiple different windows is that each window has the same pixel format. To facilitate this, I now set SDL_HINT_VIDEO_WINDOW_SHARE_PIXEL_FORMAT for the main window before calling SDL_CreateWindowFrom(). When I do this, SDL_CreateWindowFrom() will:
1. Set the pixel format of the returned window to the same pixel format as this SDL_Window passed in with the hint
2. The flag SDL_WINDOW_OPENGL will be set on the new window so it can be used for OpenGL rendering.
I only currently implemented this for Win32/WGL so implementing it for other platforms (i.e. X11) remains a TODO.
CR: SamL
Some pseudocode that shows how this is used in Source2:
HWND hExternalHwnd; // HWND that was established outside of SDL
// Create main window (happens inside platwindow.cpp)
SDL_Window *mainWindow = SDL_CreateWindow( , SDL_WINDOW_OPENGL .. );
// Create GL context, happens inside rendersystemgl
SDL_GLContext onlyContext = SDL_GL_CreateContext( mainWindow );
// Now I need to create another window from hEternalHwnd for my swap chain that will have the same pixel format as mainWindow, so set the hint
SDL_SetHint( SDL_HINT_VIDEO_WINDOW_SHARE_PIXEL_FORMAT, CFmtStr( %p, mainWindow) );
// Create the secondary window. This returned window will have SDL_WINDOW_OPENGL set and share a pixel format with mainWindow from the hint
SDL_Window *secondaryWindow = SDL_CreateWindowFrom( hExternalHwnd );
// To render to the main window:
SDL_GL_MakeCurrent( mainWindow, onlyContext );
// Do some rendering to main window
// To render to the secondary window:
SDL_GLMakeCurrent( secondaryWindow, onlyContext );
// Do some rendering to secondary window
SDL 2.x recently accepted patches to enable OpenGL ES 2 support via Google's ANGLE library. The thought is to try to eventually merge SDL/WinRT's OpenGL code with SDL-official's.
To enable this, set the environment variable SDL_MOUSE_RELATIVE_MODE_WARP to "1"
When mouse relative mode is disabled, put the cursor back where the application expects it to be, instead of where it was when relative mode was enabled.
This bumps the build SDK level to 12 (up from 10). Runtime requirements remain
the same (at API level < 12 joystick support is disabled).
Also enables building SDL for armv7 and x86.
To enable the Debug Layer, set the hint, SDL_HINT_RENDER_DIRECT3D11_DEBUG to '1'.
The Debug Layer will be turned off by default, both in Release and Debug builds (of SDL).
Anisotropic filtering is meant to be used for textures at a stark
angle, not perpendicular to the camera.
--HG--
extra : rebase_source : e01c4da3bae7f1628de7c049f31f1208dbbbb24c
