From: "Mike Gorchak"
Subject: New QNX patches
Please apply patch qnx4.diff, which is attached. What has been done:
1)Added back OpenGL ES renderer for QNX target. Added few corrections to
OpenGL ES renderer to let it work under QNX. OpenGL ES renderer do not
support textures under QNX, so I think some additional work must be done.
2) Added GL_OES_query_matrix extension to SDL_opengles.h header file, which
required by OpenGL ES 1.1 specification.
3) Added attribute clearing at the entrance of function
SDL_GL_GetAttribure(). Added error checking into the function
SDL_GL_GetAttribure(), because some attributes can't be obtained in OpenGL
ES 1.0.
4) Porting testdyngles to OpenGL ES 1.0 (1.1 has glColor4ub() and
glColor4f() functions, but 1.0 has glColor4f() only).
5) Added error checking after obtaining attributes using
SDL_GL_GetAttribute() function to the testgl2 and testgles.
6) Small correction to testmultiaudio with printing errors.
7) Added software and accelerated OpenGL ES 1.0 support into the QNX GF
driver.
Please remove ./src/audio/nto directory - it will not be used anymore.
Please create ./src/audio/qsa directory and add content of the archive
qsa.tar.gz into this directory. I rewrote some sound code, added support for
multiple audio cards, enumeration, etc. Added initial support for capture.
As far as I can understand SDL 1.3 is not supporting audio capture right now
? Sam, Am I right ? Or audio capture must be supported through the
PlayDevice routine ?
And last, please put file SDL_gf_opengles.c to the ./src/video/qnxgf
directory. It is OpenGL ES 1.1 emulation layer for some functions, which are
not supported by OpenGL ES 1.0.
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%403566
From: Stefan Klug
Subject: [SDL] SDL 1.3 WinCE backend
as promised, I've started to work on the WinCE backend of SDL 1.3
I've modified the win32 video backend and the gdi renderer, to work
properly in WinCE.
The results till now are great, but there is still some work to do.
Attached are two patches with my changes.
I would be happy if someone could review and propably commit them.
The first one (configure.in.patch) should be straight forward without
any side effects.
The second one does the necessary changes to the win32 backend. I was
really unhappy to start slicing this shiny new backend with
#ifdef/#endif but I saw no other option.
The most problematic issues are:
- WinCe has no GetDIBits, so its practically impossible to fill a
BITMAPINFO with correct values. I therefore removed the bmi member from
the GDI_RenderData in SDL_gdirender.c to prevent usage of a not or not
properly initialized bmi.
- In SDL_win32window.c I exchanged some ASCII function by their general
counterparts, (In CE only the Unicode versions are available). I don't
know if this has a negative effect when running in win32
Cheers
Stefan
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%403564
From: "Mike Gorchak"
Subject: Re: About QNX support in SDL 1.3
Here is another batch of patches.
1) Makefile.in - added SDL_opengles.h header as header to install.
2) configure.in - Added special define to detect Common Lite OpenGL ES
library in case if Common library is not installed. Added check for
clock_gettime in libc (in QNX it is in libc).
3) SDL_config.h.in - Added SDL_VIDEO_RENDER_OPENGL_ES and
SDL_VIDEO_OPENGL_ES declarations for configure script autodetection.
4) SDL_opengles.h - Added GL_API definition if it is not defined. Added
extension GL_OES_draw_texture because OpenGL ES Renderer uses it without
declaration. Added GL_OES_vertex_buffer_object extension, which is supported
under QNX OpenGL ES. Added GL_OES_single_precision extension.
5) To the test directory I've added building OpenGL ES test applications
through the autotools suite. Was support for iPhone IDE building only.
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%403553
From: "Mike Gorchak"
Subject: About QNX support in SDL 1.3
Right now I'm working on QNX SDL 1.3 drivers implementation and looks like a
lot of code must be completely reworked. But I'm ready for it :) Also I want
to add QNX Graphics Framework SDL driver, which is fullscreen graphics
framework, with support of hardware accelerated OpenGL ES implementations.
This Graphics Framework (called GF in QNX) could also use QNX Photon (window
manager GUI) as window manager.
In the attachment initial patch for QNX support in SDL 1.3
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%403549
The screensaver is disabled by default when using SDL 1.2 compatibility.
Use the new XScreenSaver extension, removed unused DPMS extension.
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%403487
* Some math functions become intrinsic in release mode, so we need to
convert all the math functions into SDL math functions, like we did
with the stdlib functions.
* Constant initializers of 8-bit values become calls to memset() in
release mode, but memset() itself is an intrinsic when explicitly
called. So we'll just explicitly call memset() in those cases.
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%403474
Subject: SDL. macos build problem
When I try to cross-build SDL1.3 r4362 it fails for macos. It seems there
is a typo in configure.in. Please, consider attached patch.
Mikle
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%403469
From: Couriersud
Subject: SDL1.3 DirectFB patches
The attached contains the following directfb changes:
- Dynamic loading of libdirectfb.so. This may to turned off as well in configure
- Use linux-input by default. May be switched off by environment variable.
- Added some code which will use directfb's x11 backend when DISPLAY is set.
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%403460
From: Couriersud
Subject: Fusionsound audio driver
attached is a diff containing a audio driver for the FusionSound
library. This sound library is closely related to DirectFB and uses the
same transport (fusion) as DirectFB when running applications "remote",
i.e. over the network. As such, it natively redirects sound where
DirectFB redirects video. This may be handy for everyone using SDL over
DirectFB.
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%403409
Plus, this fixes lots of duplicate define warnings on Mac OS X
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%403318
One or two things got moved around, but largely this is hooked up correctly
in the Unix configure system now: it can be dynamically loaded and fallback
gracefully if not available, or libXi can be directly linked to libSDL.
XInput support can be --disable'd from the configure script, too (defaults to
enabled).
Please note that while the framework is in place to gracefully fallback, the
current state of the source requires XInput. We'll need to adjust a few
things still to correct this.
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%403220
Force Feedback for SDL
by Edgar Simo, mentored by Ryan C. Gordon
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%403159
Many-mouse and tablet support
by Szymon Wilczek, mentored by Ryan C. Gordon
Everything concerning the project is noted on the wiki:
http://wilku.ravenlord.ws/doku.php?id=start
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%403155
Prepping for using MMX and SSE intrinsics instead of inline assembly.
.. except for memcpy equivalents which only get faster if they can
exploit the parallelism of loading into multiple SIMD registers. :)
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%402609
* Loop optimization for Mac OS X - should this generally be applied?
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%402600
available and to keep people form having to install yet another library I have added the essential parts of Xmu in
src/video/extensions/XmuStdCmap and an include file in src/video/extensions. The support makes use of standard X11 mechanisms to
create color maps and make sure that an application uses the same color map for each window/visual combination. This should make it
possible for gamma support to be implemented based on a single color map per application.
Hurm... it looks like "make indent" modified a few extra files. Those are getting committed too.
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%402509
Subject: ALLOCA Patch for SDL-1.2
Newsgroups: gmane.comp.lib.sdl
Date: 2006-10-24 00:31:16 GMT
Hello !
As alloca.h is not available on CYGWIN and MinGW32
it should not be checked there or it should be checked
with -mno-cygwin using.
I am a total configure.in newbie, but i found the way
that things are handled in configure.in pretty bad for the
case CYGWIN with MinGW Mode or not.
Maybe this is not possible but i would like to
have a way to detect at the start for example CYGWIN
and then add. ask if configure was called with --enable-cygwin
for example. --enable-cygwin should be optional and disabled
by default as we want to have MinGW Mode by default.
Only if the user wants it he should be able to use it.
Then the whole configure.in would get add. questions
okay the system is CYGWIN with or without MinGW Mode.
The alloca.h thing for example is only
available under CYGWIN ( without MinGW Mode ).
CU
--HG--
extra : convert_revision : svn%3Ac70aab31-4412-0410-b14c-859654838e24/trunk%402243
