Sylvain
Currently SDL_CreateTextureFromSurface picks first valid format, and do a conversion.
format = renderer->info.texture_formats[0];
for (i = 0; i < renderer->info.num_texture_formats; ++i) {
if (!SDL_ISPIXELFORMAT_FOURCC(renderer->info.texture_formats[i]) &&
SDL_ISPIXELFORMAT_ALPHA(renderer->info.texture_formats[i]) == needAlpha) {
format = renderer->info.texture_formats[i];
break;
It could try to find a better format, for instance :
if SDL_Surface has no Amask, but a colorkey :
if surface fmt is RGB888, try to pick ARGB8888 renderer fmt
if surface fmt is BGR888, try to pick ABGR8888 renderer fmt
else
try to pick the same renderer format as surface fmt
if no format has been picked, use the fallback.
I think it goes with bug 4290 fastpath BlitNtoN
when you expand a surface with pixel format of size 24 to 32, there is a fast path possible.
So with this issue:
- if you have a surface with colorkey (RGB or BGR, not palette), it takes a renderer format where the conversion is faster.
(it avoids, if possible, RGB -> ABGR which means switching RGB to BGR)
- if you have a surface ABGR format, it try to take the ABGR from the renderer.
(it avoids, if possible, ABGR -> ARGB, which means switch RGB to BGR)
Thomas Frohwein
Hi,
If a gamepad lists the Dpad as 4 buttons (Dpad Up,Down, Left, Right) like with the Xbox 360 gamepad / XInput report descriptor used by OpenBSD (https://github.com/openbsd/src/blob/master/sys/dev/usb/uhid_rdesc.h#L184), this is not recognized by the SDL BSD backend and no hat or any other listing for the D-pad exists, e.g. in sdl2-jstest (https://gitlab.com/sdl-jstest/sdl-jstest).
The attached diff fixes this and makes the D-pad on my Xbox 360 and Logitech F310 controllers usable. It adds a hat to nhats when usage HUG_DPAD_UP is found, reads the state of the D-pad buttons into array dpad[], and turns the value of dpad[] into an SDL hat direction (dpad_to_sdl()).
Tested and works with Xbox 360 controller and Logitech F310 in XInput mode. Software-side tested with sdl2-jstest and Owlboy where this worked without problems or regressions.
I don't know if this would be applicable to other *BSDs and don't have an install to test it with, therefore wrapped it in __OpenBSD__ ifdefs.
Thanks,
thfr
Removed incorrect call to SDL_SendWindowEvent(window, SDL_WINDOWEVENT_MOVED, x, y);
If the position of the window isn't adjusted in the SetWindowPosition() call, then sending the window event would have no effect because x and y equals the window x and y. If the position of the window is adjusted in the SetWindowPosition() call, then we don't want to clobber it with values that the user passed in.
Sylvain
OpenGLES2 SDL renderer has support for textures ARGB, ABGR, RGB and BGR, whereas OpenGL SDL renderer only had ARGB.
If you think it's worth adding it, here's a patch. I quickly tried and it worked, but there may be missing things or corner case.
Andrei Drexler
For X11 GenericEvents, the associated data is only available between a call to XGetEventData and the matching XFreeEventData, i.e. in X11_HandleGenericEvent. Trying to call XGetEventData a second time on the same event will fail, so an application that wants to inspect XInput2 events (e.g. for stylus pressure) has no way of retrieving its data from queued SYSWM events.
The attached patch (based on SDL-2.0.7-11629) sends SYSWM messages from X11_HandleGenericEvent while the data is still available, allowing client code to register an event filter/watcher and process the event inside the callback.
Vivante drivers use the VK_KHR_display extension for rendering directly
to the frame buffer. This patch adds support to the video driver for
Vulkan rendering using that method.
- Add an utility function SDL_Vulkan_Display_CreateSurface that creates
a surface using this extension. The display to use (if there are
multiple) can be overridden using the environment variable
"SDL_VULKAN_DISPLAY".
- Use this function in a new compilation unit SDL_vivantevideo.c,
which implements the SDL_VIDEO_VULKAN methods of the driver structure.
Dan Ginsburg
I've seen this on several devices including Moto Z running Android 7 and a Snapdragon 845 running Android 9.
What happens is as follows:
SDLActivity.onWindowFocusChanged(true) happens pretty early on, but it's before we've done SDL_CreateWindow and so Android_Window is 0x0 thus this message does not get sent:
JNIEXPORT void JNICALL SDL_JAVA_INTERFACE(nativeFocusChanged)(
JNIEnv *env, jclass cls, jboolean hasFocus)
{
SDL_LockMutex(Android_ActivityMutex);
if (Android_Window) {
__android_log_print(ANDROID_LOG_VERBOSE, "SDL", "nativeFocusChanged()");
SDL_SendWindowEvent(Android_Window, (hasFocus ? SDL_WINDOWEVENT_FOCUS_GAINED : SDL_WINDOWEVENT_FOCUS_LOST), 0, 0);
}
SDL_UnlockMutex(Android_ActivityMutex);
}
When the window does get created, in Android_CreateWindow it does this:
window->flags &= ~SDL_WINDOW_RESIZABLE; /* window is NEVER resizeable */
window->flags &= ~SDL_WINDOW_HIDDEN;
window->flags |= SDL_WINDOW_SHOWN; /* only one window on Android */
window->flags |= SDL_WINDOW_INPUT_FOCUS; /* always has input focus */
/* One window, it always has focus */
SDL_SetMouseFocus(window);
SDL_SetKeyboardFocus(window);
The SDL_SetKeyboardFocus does send an SDL_WINDOWEVENT_FOCUS_GAINED message, but it gets eaten in SDL_SendWindowEvent because we've forced SDL_WINDOW_INPUT_FOCUS beforehand:
case SDL_WINDOWEVENT_FOCUS_GAINED:
if (window->flags & SDL_WINDOW_INPUT_FOCUS) {
return 0;
}
window->flags |= SDL_WINDOW_INPUT_FOCUS;
SDL_OnWindowFocusGained(window);
break;
I can fix the problem if I comment out this line from Android_CreateWindow:
window->flags |= SDL_WINDOW_INPUT_FOCUS; /* always has input focus */
I would propose that as a fix unless there is a reason not to.
Anthony @ POW Games
I tried adding different configChanges and sure enough, "navigation" worked! Now bluetooth controllers hot-plug nicely. So shall we add it as a default to the AndroidManifest.xml?
Funny that this is how this activity is described:
"navigation" The navigation type (trackball/dpad) has changed. (This should never normally happen.)
I think the reason behind this is because the bluetooth game controller I was testing doubles-up as a keyboard, which probably comes with a DPAD? It's a MOCUTE-032X_B63-88CE
Sylvain 2019-04-18 21:22:59 UTC
Changes:
- SDL_WINDOWEVENT_FOCUS_GAINED and SDL_WINDOWEVENT_FOCUS_LOST are sent when the java method onWindowFocusChanged() is called.
- If we have support for MultiWindow (eg API >= 24), SDL event loop is blocked/un-blocked (or simply egl-backed-up or not), when java onStart()/onStop() are called.
- If not, this behaves like now, SDL event loop is blocked/un-blocked when onPause()/onResume() are called.
So if we have two app on screen and switch from one to the other, only FOCUS events are sent (and onPause()/onResume() are called but empty. onStart()/onStop() are not called).
The SDL app, un-focused, would still continue to run and display frames (currently the App would be displayed, but paused).
Like a video player app or a chronometer that would still be refreshed, even if the window hasn't the focus.
It should work also on ChromeBooks (not tested), with two apps opened at the same time.
I am not sure this fix Dan's issue. Because focus lost event triggers Minimize function (which BTW is not provided on android).
https://hg.libsdl.org/SDL/file/8703488687ca/src/video/SDL_video.c#l2653https://hg.libsdl.org/SDL/file/8703488687ca/src/video/SDL_video.c#l2634
So, in addition, it would need to add by default SDL_HINT_VIDEO_MINIMIZE_ON_FOCUS_LOSS to 0.
So that the lost focus event doesn't try to minimize the window. And this should fix also the issue.
SDL_GetWindowDisplayMode was returning an incorrect result on iPhone Plus devices (tested on iOS 12.1/12.2). The problem was that the value returned by UIScreenMode was assumed to be the physical pixels on the display, rather than the scaled retina pixels. The fix is to use the scale returned by UIScreen.scale rather than the nativeScale.
