Initial commit
This commit is contained in:
Ole André Vadla Ravnås
commit
169c65d57e
51358 changed files with 23120455 additions and 0 deletions
598
drivers/watchdog/pc87413_wdt.c
Normal file
598
drivers/watchdog/pc87413_wdt.c
Normal file
|
|
@ -0,0 +1,598 @@
|
|||
/*
|
||||
* NS pc87413-wdt Watchdog Timer driver for Linux 2.6.x.x
|
||||
*
|
||||
* This code is based on wdt.c with original copyright.
|
||||
*
|
||||
* (C) Copyright 2006 Sven Anders, <anders@anduras.de>
|
||||
* and Marcus Junker, <junker@anduras.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*
|
||||
* Neither Sven Anders, Marcus Junker nor ANDURAS AG
|
||||
* admit liability nor provide warranty for any of this software.
|
||||
* This material is provided "AS-IS" and at no charge.
|
||||
*
|
||||
* Release 1.1
|
||||
*/
|
||||
|
||||
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/miscdevice.h>
|
||||
#include <linux/watchdog.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/notifier.h>
|
||||
#include <linux/fs.h>
|
||||
#include <linux/reboot.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/uaccess.h>
|
||||
|
||||
|
||||
/* #define DEBUG 1 */
|
||||
|
||||
#define DEFAULT_TIMEOUT 1 /* 1 minute */
|
||||
#define MAX_TIMEOUT 255
|
||||
|
||||
#define VERSION "1.1"
|
||||
#define MODNAME "pc87413 WDT"
|
||||
#define DPFX MODNAME " - DEBUG: "
|
||||
|
||||
#define WDT_INDEX_IO_PORT (io+0) /* I/O port base (index register) */
|
||||
#define WDT_DATA_IO_PORT (WDT_INDEX_IO_PORT+1)
|
||||
#define SWC_LDN 0x04
|
||||
#define SIOCFG2 0x22 /* Serial IO register */
|
||||
#define WDCTL 0x10 /* Watchdog-Timer-Control-Register */
|
||||
#define WDTO 0x11 /* Watchdog timeout register */
|
||||
#define WDCFG 0x12 /* Watchdog config register */
|
||||
|
||||
#define IO_DEFAULT 0x2E /* Address used on Portwell Boards */
|
||||
|
||||
static int io = IO_DEFAULT;
|
||||
static int swc_base_addr = -1;
|
||||
|
||||
static int timeout = DEFAULT_TIMEOUT; /* timeout value */
|
||||
static unsigned long timer_enabled; /* is the timer enabled? */
|
||||
|
||||
static char expect_close; /* is the close expected? */
|
||||
|
||||
static DEFINE_SPINLOCK(io_lock); /* to guard us from io races */
|
||||
|
||||
static bool nowayout = WATCHDOG_NOWAYOUT;
|
||||
|
||||
/* -- Low level function ----------------------------------------*/
|
||||
|
||||
/* Select pins for Watchdog output */
|
||||
|
||||
static inline void pc87413_select_wdt_out(void)
|
||||
{
|
||||
unsigned int cr_data = 0;
|
||||
|
||||
/* Step 1: Select multiple pin,pin55,as WDT output */
|
||||
|
||||
outb_p(SIOCFG2, WDT_INDEX_IO_PORT);
|
||||
|
||||
cr_data = inb(WDT_DATA_IO_PORT);
|
||||
|
||||
cr_data |= 0x80; /* Set Bit7 to 1*/
|
||||
outb_p(SIOCFG2, WDT_INDEX_IO_PORT);
|
||||
|
||||
outb_p(cr_data, WDT_DATA_IO_PORT);
|
||||
|
||||
#ifdef DEBUG
|
||||
pr_info(DPFX
|
||||
"Select multiple pin,pin55,as WDT output: Bit7 to 1: %d\n",
|
||||
cr_data);
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Enable SWC functions */
|
||||
|
||||
static inline void pc87413_enable_swc(void)
|
||||
{
|
||||
unsigned int cr_data = 0;
|
||||
|
||||
/* Step 2: Enable SWC functions */
|
||||
|
||||
outb_p(0x07, WDT_INDEX_IO_PORT); /* Point SWC_LDN (LDN=4) */
|
||||
outb_p(SWC_LDN, WDT_DATA_IO_PORT);
|
||||
|
||||
outb_p(0x30, WDT_INDEX_IO_PORT); /* Read Index 0x30 First */
|
||||
cr_data = inb(WDT_DATA_IO_PORT);
|
||||
cr_data |= 0x01; /* Set Bit0 to 1 */
|
||||
outb_p(0x30, WDT_INDEX_IO_PORT);
|
||||
outb_p(cr_data, WDT_DATA_IO_PORT); /* Index0x30_bit0P1 */
|
||||
|
||||
#ifdef DEBUG
|
||||
pr_info(DPFX "pc87413 - Enable SWC functions\n");
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Read SWC I/O base address */
|
||||
|
||||
static void pc87413_get_swc_base_addr(void)
|
||||
{
|
||||
unsigned char addr_l, addr_h = 0;
|
||||
|
||||
/* Step 3: Read SWC I/O Base Address */
|
||||
|
||||
outb_p(0x60, WDT_INDEX_IO_PORT); /* Read Index 0x60 */
|
||||
addr_h = inb(WDT_DATA_IO_PORT);
|
||||
|
||||
outb_p(0x61, WDT_INDEX_IO_PORT); /* Read Index 0x61 */
|
||||
|
||||
addr_l = inb(WDT_DATA_IO_PORT);
|
||||
|
||||
swc_base_addr = (addr_h << 8) + addr_l;
|
||||
#ifdef DEBUG
|
||||
pr_info(DPFX
|
||||
"Read SWC I/O Base Address: low %d, high %d, res %d\n",
|
||||
addr_l, addr_h, swc_base_addr);
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Select Bank 3 of SWC */
|
||||
|
||||
static inline void pc87413_swc_bank3(void)
|
||||
{
|
||||
/* Step 4: Select Bank3 of SWC */
|
||||
outb_p(inb(swc_base_addr + 0x0f) | 0x03, swc_base_addr + 0x0f);
|
||||
#ifdef DEBUG
|
||||
pr_info(DPFX "Select Bank3 of SWC\n");
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Set watchdog timeout to x minutes */
|
||||
|
||||
static inline void pc87413_programm_wdto(char pc87413_time)
|
||||
{
|
||||
/* Step 5: Programm WDTO, Twd. */
|
||||
outb_p(pc87413_time, swc_base_addr + WDTO);
|
||||
#ifdef DEBUG
|
||||
pr_info(DPFX "Set WDTO to %d minutes\n", pc87413_time);
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Enable WDEN */
|
||||
|
||||
static inline void pc87413_enable_wden(void)
|
||||
{
|
||||
/* Step 6: Enable WDEN */
|
||||
outb_p(inb(swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL);
|
||||
#ifdef DEBUG
|
||||
pr_info(DPFX "Enable WDEN\n");
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Enable SW_WD_TREN */
|
||||
static inline void pc87413_enable_sw_wd_tren(void)
|
||||
{
|
||||
/* Enable SW_WD_TREN */
|
||||
outb_p(inb(swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG);
|
||||
#ifdef DEBUG
|
||||
pr_info(DPFX "Enable SW_WD_TREN\n");
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Disable SW_WD_TREN */
|
||||
|
||||
static inline void pc87413_disable_sw_wd_tren(void)
|
||||
{
|
||||
/* Disable SW_WD_TREN */
|
||||
outb_p(inb(swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG);
|
||||
#ifdef DEBUG
|
||||
pr_info(DPFX "pc87413 - Disable SW_WD_TREN\n");
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Enable SW_WD_TRG */
|
||||
|
||||
static inline void pc87413_enable_sw_wd_trg(void)
|
||||
{
|
||||
/* Enable SW_WD_TRG */
|
||||
outb_p(inb(swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL);
|
||||
#ifdef DEBUG
|
||||
pr_info(DPFX "pc87413 - Enable SW_WD_TRG\n");
|
||||
#endif
|
||||
}
|
||||
|
||||
/* Disable SW_WD_TRG */
|
||||
|
||||
static inline void pc87413_disable_sw_wd_trg(void)
|
||||
{
|
||||
/* Disable SW_WD_TRG */
|
||||
outb_p(inb(swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL);
|
||||
#ifdef DEBUG
|
||||
pr_info(DPFX "Disable SW_WD_TRG\n");
|
||||
#endif
|
||||
}
|
||||
|
||||
/* -- Higher level functions ------------------------------------*/
|
||||
|
||||
/* Enable the watchdog */
|
||||
|
||||
static void pc87413_enable(void)
|
||||
{
|
||||
spin_lock(&io_lock);
|
||||
|
||||
pc87413_swc_bank3();
|
||||
pc87413_programm_wdto(timeout);
|
||||
pc87413_enable_wden();
|
||||
pc87413_enable_sw_wd_tren();
|
||||
pc87413_enable_sw_wd_trg();
|
||||
|
||||
spin_unlock(&io_lock);
|
||||
}
|
||||
|
||||
/* Disable the watchdog */
|
||||
|
||||
static void pc87413_disable(void)
|
||||
{
|
||||
spin_lock(&io_lock);
|
||||
|
||||
pc87413_swc_bank3();
|
||||
pc87413_disable_sw_wd_tren();
|
||||
pc87413_disable_sw_wd_trg();
|
||||
pc87413_programm_wdto(0);
|
||||
|
||||
spin_unlock(&io_lock);
|
||||
}
|
||||
|
||||
/* Refresh the watchdog */
|
||||
|
||||
static void pc87413_refresh(void)
|
||||
{
|
||||
spin_lock(&io_lock);
|
||||
|
||||
pc87413_swc_bank3();
|
||||
pc87413_disable_sw_wd_tren();
|
||||
pc87413_disable_sw_wd_trg();
|
||||
pc87413_programm_wdto(timeout);
|
||||
pc87413_enable_wden();
|
||||
pc87413_enable_sw_wd_tren();
|
||||
pc87413_enable_sw_wd_trg();
|
||||
|
||||
spin_unlock(&io_lock);
|
||||
}
|
||||
|
||||
/* -- File operations -------------------------------------------*/
|
||||
|
||||
/**
|
||||
* pc87413_open:
|
||||
* @inode: inode of device
|
||||
* @file: file handle to device
|
||||
*
|
||||
*/
|
||||
|
||||
static int pc87413_open(struct inode *inode, struct file *file)
|
||||
{
|
||||
/* /dev/watchdog can only be opened once */
|
||||
|
||||
if (test_and_set_bit(0, &timer_enabled))
|
||||
return -EBUSY;
|
||||
|
||||
if (nowayout)
|
||||
__module_get(THIS_MODULE);
|
||||
|
||||
/* Reload and activate timer */
|
||||
pc87413_refresh();
|
||||
|
||||
pr_info("Watchdog enabled. Timeout set to %d minute(s).\n", timeout);
|
||||
|
||||
return nonseekable_open(inode, file);
|
||||
}
|
||||
|
||||
/**
|
||||
* pc87413_release:
|
||||
* @inode: inode to board
|
||||
* @file: file handle to board
|
||||
*
|
||||
* The watchdog has a configurable API. There is a religious dispute
|
||||
* between people who want their watchdog to be able to shut down and
|
||||
* those who want to be sure if the watchdog manager dies the machine
|
||||
* reboots. In the former case we disable the counters, in the latter
|
||||
* case you have to open it again very soon.
|
||||
*/
|
||||
|
||||
static int pc87413_release(struct inode *inode, struct file *file)
|
||||
{
|
||||
/* Shut off the timer. */
|
||||
|
||||
if (expect_close == 42) {
|
||||
pc87413_disable();
|
||||
pr_info("Watchdog disabled, sleeping again...\n");
|
||||
} else {
|
||||
pr_crit("Unexpected close, not stopping watchdog!\n");
|
||||
pc87413_refresh();
|
||||
}
|
||||
clear_bit(0, &timer_enabled);
|
||||
expect_close = 0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* pc87413_status:
|
||||
*
|
||||
* return, if the watchdog is enabled (timeout is set...)
|
||||
*/
|
||||
|
||||
|
||||
static int pc87413_status(void)
|
||||
{
|
||||
return 0; /* currently not supported */
|
||||
}
|
||||
|
||||
/**
|
||||
* pc87413_write:
|
||||
* @file: file handle to the watchdog
|
||||
* @data: data buffer to write
|
||||
* @len: length in bytes
|
||||
* @ppos: pointer to the position to write. No seeks allowed
|
||||
*
|
||||
* A write to a watchdog device is defined as a keepalive signal. Any
|
||||
* write of data will do, as we we don't define content meaning.
|
||||
*/
|
||||
|
||||
static ssize_t pc87413_write(struct file *file, const char __user *data,
|
||||
size_t len, loff_t *ppos)
|
||||
{
|
||||
/* See if we got the magic character 'V' and reload the timer */
|
||||
if (len) {
|
||||
if (!nowayout) {
|
||||
size_t i;
|
||||
|
||||
/* reset expect flag */
|
||||
expect_close = 0;
|
||||
|
||||
/* scan to see whether or not we got the
|
||||
magic character */
|
||||
for (i = 0; i != len; i++) {
|
||||
char c;
|
||||
if (get_user(c, data + i))
|
||||
return -EFAULT;
|
||||
if (c == 'V')
|
||||
expect_close = 42;
|
||||
}
|
||||
}
|
||||
|
||||
/* someone wrote to us, we should reload the timer */
|
||||
pc87413_refresh();
|
||||
}
|
||||
return len;
|
||||
}
|
||||
|
||||
/**
|
||||
* pc87413_ioctl:
|
||||
* @file: file handle to the device
|
||||
* @cmd: watchdog command
|
||||
* @arg: argument pointer
|
||||
*
|
||||
* The watchdog API defines a common set of functions for all watchdogs
|
||||
* according to their available features. We only actually usefully support
|
||||
* querying capabilities and current status.
|
||||
*/
|
||||
|
||||
static long pc87413_ioctl(struct file *file, unsigned int cmd,
|
||||
unsigned long arg)
|
||||
{
|
||||
int new_timeout;
|
||||
|
||||
union {
|
||||
struct watchdog_info __user *ident;
|
||||
int __user *i;
|
||||
} uarg;
|
||||
|
||||
static const struct watchdog_info ident = {
|
||||
.options = WDIOF_KEEPALIVEPING |
|
||||
WDIOF_SETTIMEOUT |
|
||||
WDIOF_MAGICCLOSE,
|
||||
.firmware_version = 1,
|
||||
.identity = "PC87413(HF/F) watchdog",
|
||||
};
|
||||
|
||||
uarg.i = (int __user *)arg;
|
||||
|
||||
switch (cmd) {
|
||||
case WDIOC_GETSUPPORT:
|
||||
return copy_to_user(uarg.ident, &ident,
|
||||
sizeof(ident)) ? -EFAULT : 0;
|
||||
case WDIOC_GETSTATUS:
|
||||
return put_user(pc87413_status(), uarg.i);
|
||||
case WDIOC_GETBOOTSTATUS:
|
||||
return put_user(0, uarg.i);
|
||||
case WDIOC_SETOPTIONS:
|
||||
{
|
||||
int options, retval = -EINVAL;
|
||||
if (get_user(options, uarg.i))
|
||||
return -EFAULT;
|
||||
if (options & WDIOS_DISABLECARD) {
|
||||
pc87413_disable();
|
||||
retval = 0;
|
||||
}
|
||||
if (options & WDIOS_ENABLECARD) {
|
||||
pc87413_enable();
|
||||
retval = 0;
|
||||
}
|
||||
return retval;
|
||||
}
|
||||
case WDIOC_KEEPALIVE:
|
||||
pc87413_refresh();
|
||||
#ifdef DEBUG
|
||||
pr_info(DPFX "keepalive\n");
|
||||
#endif
|
||||
return 0;
|
||||
case WDIOC_SETTIMEOUT:
|
||||
if (get_user(new_timeout, uarg.i))
|
||||
return -EFAULT;
|
||||
/* the API states this is given in secs */
|
||||
new_timeout /= 60;
|
||||
if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
|
||||
return -EINVAL;
|
||||
timeout = new_timeout;
|
||||
pc87413_refresh();
|
||||
/* fall through and return the new timeout... */
|
||||
case WDIOC_GETTIMEOUT:
|
||||
new_timeout = timeout * 60;
|
||||
return put_user(new_timeout, uarg.i);
|
||||
default:
|
||||
return -ENOTTY;
|
||||
}
|
||||
}
|
||||
|
||||
/* -- Notifier funtions -----------------------------------------*/
|
||||
|
||||
/**
|
||||
* notify_sys:
|
||||
* @this: our notifier block
|
||||
* @code: the event being reported
|
||||
* @unused: unused
|
||||
*
|
||||
* Our notifier is called on system shutdowns. We want to turn the card
|
||||
* off at reboot otherwise the machine will reboot again during memory
|
||||
* test or worse yet during the following fsck. This would suck, in fact
|
||||
* trust me - if it happens it does suck.
|
||||
*/
|
||||
|
||||
static int pc87413_notify_sys(struct notifier_block *this,
|
||||
unsigned long code,
|
||||
void *unused)
|
||||
{
|
||||
if (code == SYS_DOWN || code == SYS_HALT)
|
||||
/* Turn the card off */
|
||||
pc87413_disable();
|
||||
return NOTIFY_DONE;
|
||||
}
|
||||
|
||||
/* -- Module's structures ---------------------------------------*/
|
||||
|
||||
static const struct file_operations pc87413_fops = {
|
||||
.owner = THIS_MODULE,
|
||||
.llseek = no_llseek,
|
||||
.write = pc87413_write,
|
||||
.unlocked_ioctl = pc87413_ioctl,
|
||||
.open = pc87413_open,
|
||||
.release = pc87413_release,
|
||||
};
|
||||
|
||||
static struct notifier_block pc87413_notifier = {
|
||||
.notifier_call = pc87413_notify_sys,
|
||||
};
|
||||
|
||||
static struct miscdevice pc87413_miscdev = {
|
||||
.minor = WATCHDOG_MINOR,
|
||||
.name = "watchdog",
|
||||
.fops = &pc87413_fops,
|
||||
};
|
||||
|
||||
/* -- Module init functions -------------------------------------*/
|
||||
|
||||
/**
|
||||
* pc87413_init: module's "constructor"
|
||||
*
|
||||
* Set up the WDT watchdog board. All we have to do is grab the
|
||||
* resources we require and bitch if anyone beat us to them.
|
||||
* The open() function will actually kick the board off.
|
||||
*/
|
||||
|
||||
static int __init pc87413_init(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
pr_info("Version " VERSION " at io 0x%X\n",
|
||||
WDT_INDEX_IO_PORT);
|
||||
|
||||
if (!request_muxed_region(io, 2, MODNAME))
|
||||
return -EBUSY;
|
||||
|
||||
ret = register_reboot_notifier(&pc87413_notifier);
|
||||
if (ret != 0) {
|
||||
pr_err("cannot register reboot notifier (err=%d)\n", ret);
|
||||
}
|
||||
|
||||
ret = misc_register(&pc87413_miscdev);
|
||||
if (ret != 0) {
|
||||
pr_err("cannot register miscdev on minor=%d (err=%d)\n",
|
||||
WATCHDOG_MINOR, ret);
|
||||
goto reboot_unreg;
|
||||
}
|
||||
pr_info("initialized. timeout=%d min\n", timeout);
|
||||
|
||||
pc87413_select_wdt_out();
|
||||
pc87413_enable_swc();
|
||||
pc87413_get_swc_base_addr();
|
||||
|
||||
if (!request_region(swc_base_addr, 0x20, MODNAME)) {
|
||||
pr_err("cannot request SWC region at 0x%x\n", swc_base_addr);
|
||||
ret = -EBUSY;
|
||||
goto misc_unreg;
|
||||
}
|
||||
|
||||
pc87413_enable();
|
||||
|
||||
release_region(io, 2);
|
||||
return 0;
|
||||
|
||||
misc_unreg:
|
||||
misc_deregister(&pc87413_miscdev);
|
||||
reboot_unreg:
|
||||
unregister_reboot_notifier(&pc87413_notifier);
|
||||
release_region(io, 2);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* pc87413_exit: module's "destructor"
|
||||
*
|
||||
* Unload the watchdog. You cannot do this with any file handles open.
|
||||
* If your watchdog is set to continue ticking on close and you unload
|
||||
* it, well it keeps ticking. We won't get the interrupt but the board
|
||||
* will not touch PC memory so all is fine. You just have to load a new
|
||||
* module in 60 seconds or reboot.
|
||||
*/
|
||||
|
||||
static void __exit pc87413_exit(void)
|
||||
{
|
||||
/* Stop the timer before we leave */
|
||||
if (!nowayout) {
|
||||
pc87413_disable();
|
||||
pr_info("Watchdog disabled\n");
|
||||
}
|
||||
|
||||
misc_deregister(&pc87413_miscdev);
|
||||
unregister_reboot_notifier(&pc87413_notifier);
|
||||
release_region(swc_base_addr, 0x20);
|
||||
|
||||
pr_info("watchdog component driver removed\n");
|
||||
}
|
||||
|
||||
module_init(pc87413_init);
|
||||
module_exit(pc87413_exit);
|
||||
|
||||
MODULE_AUTHOR("Sven Anders <anders@anduras.de>, "
|
||||
"Marcus Junker <junker@anduras.de>,");
|
||||
MODULE_DESCRIPTION("PC87413 WDT driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|
||||
|
||||
module_param(io, int, 0);
|
||||
MODULE_PARM_DESC(io, MODNAME " I/O port (default: "
|
||||
__MODULE_STRING(IO_DEFAULT) ").");
|
||||
|
||||
module_param(timeout, int, 0);
|
||||
MODULE_PARM_DESC(timeout,
|
||||
"Watchdog timeout in minutes (default="
|
||||
__MODULE_STRING(DEFAULT_TIMEOUT) ").");
|
||||
|
||||
module_param(nowayout, bool, 0);
|
||||
MODULE_PARM_DESC(nowayout,
|
||||
"Watchdog cannot be stopped once started (default="
|
||||
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
||||
|
||||
Loading…
Add table
Add a link
Reference in a new issue