1052 lines
22 KiB
C
Executable file
1052 lines
22 KiB
C
Executable file
/*
|
|
* A V4L2 driver for SP5409 cameras.
|
|
*
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/clk.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-chip-ident.h>
|
|
#include <media/v4l2-mediabus.h>
|
|
#include <linux/io.h>
|
|
#include "camera.h"
|
|
#include "sensor_helper.h"
|
|
|
|
MODULE_AUTHOR("zw");
|
|
MODULE_DESCRIPTION("A low-level driver for SP5409 sensors");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
//for internel driver debug
|
|
#define DEV_DBG_EN 1
|
|
#if(DEV_DBG_EN == 1)
|
|
#define vfe_dev_dbg(x,arg...) printk("[SP5409]"x,##arg)
|
|
#else
|
|
#define vfe_dev_dbg(x,arg...)
|
|
#endif
|
|
#define vfe_dev_err(x,arg...) printk("[SP5409]"x,##arg)
|
|
#define vfe_dev_print(x,arg...) printk("[SP5409]"x,##arg)
|
|
|
|
#define LOG_ERR_RET(x) { \
|
|
int ret; \
|
|
ret = x; \
|
|
if(ret < 0) {\
|
|
vfe_dev_err("error at %s\n",__func__); \
|
|
return ret; \
|
|
} \
|
|
}
|
|
|
|
//define module timing
|
|
#define MCLK (24*1000*1000)
|
|
#define VREF_POL V4L2_MBUS_VSYNC_ACTIVE_HIGH
|
|
#define HREF_POL V4L2_MBUS_HSYNC_ACTIVE_HIGH
|
|
#define CLK_POL V4L2_MBUS_PCLK_SAMPLE_RISING
|
|
#define V4L2_IDENT_SENSOR 0x5409
|
|
|
|
|
|
|
|
/*
|
|
* The sp5408 sits on i2c with ID 0x78
|
|
*/
|
|
#define I2C_ADDR 0x78
|
|
#define SENSOR_NAME "sp5409"
|
|
static struct v4l2_subdev *glb_sd;
|
|
|
|
/*
|
|
* Information we maintain about a known sensor.
|
|
*/
|
|
struct sensor_format_struct; /* coming later */
|
|
|
|
struct cfg_array { /* coming later */
|
|
struct regval_list * regs;
|
|
int size;
|
|
};
|
|
|
|
static inline struct sensor_info *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct sensor_info, sd);
|
|
}
|
|
|
|
|
|
/*
|
|
* The default register settings
|
|
*
|
|
*/
|
|
|
|
static struct regval_list sensor_default_regs[] = {
|
|
|
|
};
|
|
|
|
//for capture
|
|
static struct regval_list sensor_qsxga_regs[] = { //qsxga: 2592*1936@15fps
|
|
//raw 10
|
|
{0xfd, 0x00},
|
|
{0x30, 0x15},
|
|
{0x33, 0x09},
|
|
|
|
{0xfd, 0x01},
|
|
{0xc4, 0x48},
|
|
{0xa4, 0x2d},
|
|
{0xe7, 0x03},
|
|
{0xe7, 0x00},
|
|
|
|
{0xfd, 0x00},
|
|
{0x1b, 0x00},
|
|
{0x2f, 0x14},
|
|
{0x34, 0x00},
|
|
|
|
{0xfd, 0x01},
|
|
{0x06, 0x10},
|
|
{0x03, 0x03},
|
|
{0x04, 0x75},
|
|
{0x31, 0x00},//20140919
|
|
{0x24, 0xf0},
|
|
{0x01, 0x01},
|
|
{0x25, 0xf4},
|
|
{0x21, 0x37},
|
|
{0x26, 0x0c},
|
|
{0x2c, 0xb0},
|
|
{0x8a, 0x55},
|
|
{0x8b, 0x55},
|
|
{0x75, 0x3a},
|
|
{0x58, 0x2a},
|
|
{0x77, 0x6f},
|
|
{0x78, 0xef},
|
|
{0x84, 0x0f},
|
|
{0x85, 0x02},
|
|
{0x11, 0x30},
|
|
{0x51, 0x20},
|
|
{0x52, 0x20},
|
|
{0x5d, 0x00},
|
|
{0x5e, 0x00},
|
|
{0x68, 0x52},
|
|
{0x72, 0x54},
|
|
{0xf0, 0x04},
|
|
{0xf1, 0x04},
|
|
{0xf2, 0x04},
|
|
{0xf3, 0x04},
|
|
{0xfb, 0x25},
|
|
|
|
{0xfd, 0x02},
|
|
{0x5e, 0x07},
|
|
{0xa2, 0x07},
|
|
{0xa3, 0x98},
|
|
{0xa6, 0x05},
|
|
{0xa7, 0x10},
|
|
|
|
{0xfd, 0x01},
|
|
{0xa1, 0x02},
|
|
{0xb3, 0x00},
|
|
{0xb1, 0x01},
|
|
{0xa4, 0x6d},
|
|
{0xb6, 0xc0},
|
|
{0x9d, 0x25},
|
|
{0x97, 0x08},
|
|
{0xc4, 0x28},
|
|
//{0xc1, 0x04},
|
|
{0xc1, 0x09},
|
|
{0x8e, 0x0a},
|
|
{0x8f, 0x20},
|
|
{0x90, 0x07},
|
|
{0x91, 0x98},
|
|
};
|
|
|
|
//for video
|
|
static struct regval_list sensor_1080p_regs[] = { //1080: 1920*1080@30fps
|
|
//raw 10
|
|
{0xfd, 0x00},
|
|
{0x30, 0x15},
|
|
{0x33, 0x09},
|
|
|
|
{0xfd, 0x01},
|
|
{0xc4, 0x48},
|
|
{0xa4, 0x2d},
|
|
{0xe7, 0x03},
|
|
{0xe7, 0x00},
|
|
|
|
{0xfd, 0x00},
|
|
{0x1b, 0x00},
|
|
{0x2f, 0x14},
|
|
{0x34, 0x00},
|
|
|
|
{0xfd, 0x01},
|
|
{0x03, 0x03},
|
|
{0x04, 0x75},
|
|
{0x31, 0x02},
|
|
{0x24, 0xf0},
|
|
{0x01, 0x01},
|
|
{0x25, 0xf4},
|
|
{0x21, 0x37},
|
|
{0x26, 0x0c},
|
|
{0x2c, 0xb0},
|
|
{0x8a, 0x55},
|
|
{0x8b, 0x55},
|
|
{0x75, 0x3a},
|
|
{0x58, 0x2a},
|
|
{0x77, 0x6f},
|
|
{0x78, 0xef},
|
|
{0x84, 0x0f},
|
|
{0x85, 0x02},
|
|
{0x11, 0x30},
|
|
{0x51, 0x20},
|
|
{0x52, 0x20},
|
|
{0x5d, 0x00},
|
|
{0x5e, 0x00},
|
|
{0x68, 0x52},
|
|
{0x72, 0x54},
|
|
{0xf0, 0x04},
|
|
{0xf1, 0x04},
|
|
{0xf2, 0x04},
|
|
{0xf3, 0x04},
|
|
{0xfb, 0x25},
|
|
|
|
{0xfd, 0x02},
|
|
{0x5e, 0x07},
|
|
{0xa2, 0x04},
|
|
{0xa3, 0x38},
|
|
{0xa6, 0x03},
|
|
{0xa7, 0xc0},
|
|
|
|
{0xfd, 0x01},
|
|
{0xa1, 0x02},
|
|
{0xb3, 0x00},
|
|
{0xb1, 0x01},
|
|
{0xa4, 0x6d},
|
|
{0xb6, 0xc0},
|
|
{0x9d, 0x25},
|
|
{0x97, 0x08},
|
|
{0xc4, 0x28},
|
|
//{0xc1, 0x04},
|
|
{0xc1, 0x09},
|
|
{0x8e, 0x07},
|
|
{0x8f, 0x80},
|
|
{0x90, 0x04},
|
|
{0x91, 0x38},
|
|
};
|
|
|
|
static struct regval_list sensor_sxga_regs[] = { //SXGA: 1280*960@30fps
|
|
//raw 10
|
|
{0xfd, 0x00},
|
|
{0x30, 0x15},
|
|
{0x33, 0x09},
|
|
|
|
{0xfd, 0x01},
|
|
{0xc4, 0x48},
|
|
{0xa4, 0x2d},
|
|
{0xe7, 0x03},
|
|
{0xe7, 0x00},
|
|
|
|
{0xfd, 0x00}, //
|
|
{0x1b, 0x00}, //
|
|
{0x2f, 0x14}, //
|
|
{0x34, 0x01}, //pll_clk=96M
|
|
{0x30, 0x11}, //
|
|
{0x33, 0x00}, //
|
|
|
|
{0xfd, 0x01}, //
|
|
{0x21, 0x37}, //
|
|
{0x31, 0x04}, //binning mode
|
|
{0x03, 0x01}, //exp time 2base
|
|
{0x04, 0xee}, //
|
|
{0x24, 0xf0}, //pga gain
|
|
{0x01, 0x01}, //
|
|
{0x25, 0xf4}, //reg dac, bl_en
|
|
{0x26, 0x0c}, //vref2 1.3v, disable rd
|
|
{0x2c, 0xb0}, //
|
|
{0x2e, 0x30}, //
|
|
{0x8a, 0x55}, //
|
|
{0x8b, 0x55}, //
|
|
{0x77, 0x6f}, //
|
|
{0x78, 0xef}, //
|
|
{0x84, 0x0f}, //
|
|
{0x85, 0x02}, //
|
|
{0xd0, 0x00}, //
|
|
{0x51, 0x20}, //p1
|
|
{0x52, 0x20}, //p2
|
|
{0x5d, 0x00}, //
|
|
{0x5e, 0x00}, //
|
|
{0x68, 0x52}, //p22
|
|
{0x72, 0x54}, //p22
|
|
{0x58, 0x20}, //
|
|
{0x75, 0x3a}, //
|
|
{0xfb, 0x25}, //blacklevel enable
|
|
|
|
{0xfd, 0x02},
|
|
{0x5e, 0x07},
|
|
{0xa2, 0x03},
|
|
{0xa3, 0xc0},
|
|
{0xa6, 0x02},
|
|
{0xa7, 0x80},
|
|
|
|
{0xfd, 0x01}, //
|
|
{0xb3, 0x00}, //
|
|
{0xb1, 0x01}, //
|
|
{0xb6, 0xc0}, //80:1lane,c0:2lane
|
|
{0x9d, 0x25}, //
|
|
{0xa1, 0x01}, //
|
|
{0x97, 0x08}, //
|
|
{0xc4, 0x28}, //
|
|
{0xc1, 0x09}, //
|
|
{0xa4, 0x6d}, //
|
|
{0x8e, 0x05}, //
|
|
{0x8f, 0x18}, //1304
|
|
{0x90, 0x03}, //
|
|
{0x91, 0xd4}, //980
|
|
{0x8e, 0x05},
|
|
{0x8f, 0x00},
|
|
{0x90, 0x03},
|
|
{0x91, 0xc0},
|
|
};
|
|
|
|
//static struct regval_list sensor_720p_regs[] = {
|
|
//};
|
|
|
|
/*
|
|
* Here we'll try to encapsulate the changes for just the output
|
|
* video format.
|
|
*
|
|
*/
|
|
|
|
static struct regval_list sensor_fmt_raw[] = {
|
|
|
|
};
|
|
|
|
static int sensor_g_exp(struct v4l2_subdev *sd, __s32 *value)
|
|
{
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
*value = info->exp;
|
|
vfe_dev_dbg("sensor_get_exposure = %d\n", info->exp);
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_s_exp_gain(struct v4l2_subdev *sd, struct sensor_exp_gain *exp_gain)
|
|
{
|
|
int exp_val, gain_val;
|
|
unsigned char explow=0,expmid=0;//,exphigh=0,vts_diff_low,vts_diff_high;
|
|
unsigned char gainlow=0;//,gainhigh=0;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
exp_val = exp_gain->exp_val;
|
|
gain_val = exp_gain->gain_val;
|
|
printk("exp_val = %d,gain_val = %d\n",exp_val,gain_val);
|
|
|
|
if(gain_val<1*16)
|
|
gain_val=16;
|
|
if(gain_val>64*16-1)
|
|
gain_val=64*16-1;
|
|
|
|
if(exp_val>0xfffff)
|
|
exp_val=0xfffff;
|
|
|
|
gainlow=(unsigned char)(gain_val&0xff);
|
|
expmid = (unsigned char) ( (0x0ff000&exp_val)>>12);
|
|
explow = (unsigned char) ( (0x000ff0&exp_val)>>4);
|
|
|
|
sensor_write(sd, 0xfd, 0x01);
|
|
sensor_write(sd, 0x24, gainlow); //lwj
|
|
|
|
sensor_write(sd, 0x03, expmid);
|
|
sensor_write(sd, 0x04, explow);
|
|
sensor_write(sd, 0x01, 0x01);
|
|
|
|
info->exp = exp_val;
|
|
info->gain = gain_val;
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_s_exp(struct v4l2_subdev *sd, unsigned int exp_val)
|
|
{
|
|
unsigned char explow,expmid;//,exphigh;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
if(exp_val>0xfffff)
|
|
exp_val=0xfffff;
|
|
|
|
sensor_write(sd, 0xfd, 0x01);
|
|
|
|
expmid = (unsigned char) ( (0x0ff000&exp_val)>>12);
|
|
explow = (unsigned char) ( (0x000ff0&exp_val)>>4);
|
|
|
|
sensor_write(sd, 0x03, expmid);
|
|
sensor_write(sd, 0x04, explow);
|
|
sensor_write(sd, 0x01, 0x01);
|
|
//printk("sp5409 sensor_set_exp = %d, Done!\n", exp_val);
|
|
|
|
info->exp = exp_val;
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_g_gain(struct v4l2_subdev *sd, __s32 *value)
|
|
{
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
*value = info->gain;
|
|
vfe_dev_dbg("sensor_get_gain = %d\n", info->gain);
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_s_gain(struct v4l2_subdev *sd, int gain_val)
|
|
{
|
|
struct sensor_info *info = to_state(sd);
|
|
unsigned char gainlow=0;
|
|
|
|
if(gain_val<1*16)
|
|
gain_val=16;
|
|
if(gain_val>64*16-1)
|
|
gain_val=64*16-1;
|
|
|
|
gainlow=(unsigned char)(gain_val&0xff);
|
|
|
|
sensor_write(sd, 0xfd, 0x01);//enter group write
|
|
sensor_write(sd, 0x24, gainlow); //lwj
|
|
sensor_write(sd, 0x01, 0x01);//end group write
|
|
|
|
// printk("sp5409 sensor_set_gain = %d, Done!\n", gain_val);
|
|
info->gain = gain_val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Stuff that knows about the sensor.
|
|
*/
|
|
static int sensor_power(struct v4l2_subdev *sd, int on)
|
|
{
|
|
cci_lock(sd);
|
|
switch(on)
|
|
{
|
|
case CSI_SUBDEV_STBY_ON:
|
|
vfe_dev_dbg("CSI_SUBDEV_STBY_ON\n");
|
|
vfe_gpio_write(sd,PWDN,CSI_GPIO_HIGH);
|
|
usleep_range(10000,12000);
|
|
vfe_gpio_write(sd,PWDN,CSI_GPIO_HIGH);
|
|
msleep(100);
|
|
vfe_set_mclk(sd,OFF);
|
|
usleep_range(10000,12000);
|
|
break;
|
|
case CSI_SUBDEV_STBY_OFF:
|
|
vfe_dev_dbg("CSI_SUBDEV_STBY_OFF\n");
|
|
vfe_set_mclk_freq(sd,MCLK);
|
|
vfe_set_mclk(sd,ON);
|
|
usleep_range(30000,31000);
|
|
vfe_gpio_write(sd,PWDN,CSI_GPIO_LOW);
|
|
msleep(100);
|
|
break;
|
|
case CSI_SUBDEV_PWR_ON:
|
|
vfe_dev_dbg("CSI_SUBDEV_PWR_ON\n");
|
|
vfe_gpio_set_status(sd,PWDN,1);//set the gpio to output
|
|
vfe_gpio_set_status(sd,RESET,1);//set the gpio to output
|
|
vfe_gpio_write(sd,PWDN,CSI_GPIO_HIGH);
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_LOW);
|
|
usleep_range(1000,1200);
|
|
vfe_set_mclk_freq(sd,MCLK);
|
|
vfe_set_mclk(sd,ON);
|
|
usleep_range(10000,12000);
|
|
vfe_gpio_write(sd,POWER_EN,CSI_GPIO_HIGH);
|
|
vfe_set_pmu_channel(sd,AVDD,ON);
|
|
usleep_range(10000,12000);
|
|
vfe_set_pmu_channel(sd,IOVDD,ON);
|
|
usleep_range(10000,12000);
|
|
vfe_set_pmu_channel(sd,DVDD,ON);
|
|
usleep_range(10000,12000);
|
|
vfe_set_pmu_channel(sd,AFVDD,ON);
|
|
usleep_range(10000,12000);
|
|
vfe_gpio_write(sd,PWDN,CSI_GPIO_LOW);
|
|
usleep_range(5000,10000);
|
|
vfe_gpio_write(sd,PWDN,CSI_GPIO_HIGH);
|
|
usleep_range(10000,12000);
|
|
vfe_gpio_write(sd,PWDN,CSI_GPIO_LOW);
|
|
usleep_range(10000,12000);
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_HIGH);
|
|
usleep_range(30000,31000);
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_LOW);
|
|
usleep_range(30000,31000);
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_HIGH);
|
|
usleep_range(30000,31000);
|
|
break;
|
|
case CSI_SUBDEV_PWR_OFF:
|
|
vfe_dev_dbg("CSI_SUBDEV_PWR_OFF\n");
|
|
vfe_gpio_write(sd,PWDN,CSI_GPIO_HIGH);
|
|
usleep_range(10000,12000);
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_LOW);
|
|
usleep_range(10000,12000);
|
|
vfe_gpio_write(sd,POWER_EN,CSI_GPIO_LOW);
|
|
vfe_set_pmu_channel(sd,AFVDD,OFF);
|
|
usleep_range(10000,12000);
|
|
vfe_set_pmu_channel(sd,DVDD,OFF);
|
|
usleep_range(10000,12000);
|
|
vfe_set_pmu_channel(sd,AVDD,OFF);
|
|
usleep_range(10000,12000);
|
|
vfe_set_pmu_channel(sd,IOVDD,OFF);
|
|
usleep_range(10000,12000);
|
|
vfe_set_mclk(sd,OFF);
|
|
vfe_gpio_set_status(sd,RESET,0);//set the gpio to input
|
|
vfe_gpio_set_status(sd,PWDN,0);//set the gpio to input
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
cci_unlock(sd);
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_reset(struct v4l2_subdev *sd, u32 val)
|
|
{
|
|
switch(val)
|
|
{
|
|
case 0:
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_HIGH);
|
|
usleep_range(10000,12000);
|
|
break;
|
|
case 1:
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_LOW);
|
|
usleep_range(10000,12000);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_detect(struct v4l2_subdev *sd)
|
|
{
|
|
data_type rdval;
|
|
|
|
LOG_ERR_RET(sensor_read(sd, 0x02, &rdval))
|
|
if(rdval != 0x54)
|
|
return -ENODEV;
|
|
|
|
LOG_ERR_RET(sensor_read(sd, 0x03, &rdval))
|
|
if(rdval != 0x09)
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_init(struct v4l2_subdev *sd, u32 val)
|
|
{
|
|
int ret;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
vfe_dev_dbg("sensor_init\n");
|
|
|
|
/*Make sure it is a target sensor*/
|
|
ret = sensor_detect(sd);
|
|
if (ret) {
|
|
vfe_dev_err("chip found is not an target chip.\n");
|
|
return ret;
|
|
}
|
|
|
|
vfe_get_standby_mode(sd,&info->stby_mode);
|
|
|
|
if((info->stby_mode == HW_STBY || info->stby_mode == SW_STBY) \
|
|
&& info->init_first_flag == 0) {
|
|
vfe_dev_print("stby_mode and init_first_flag = 0\n");
|
|
return 0;
|
|
}
|
|
|
|
info->focus_status = 0;
|
|
info->low_speed = 0;
|
|
info->width = QSXGA_WIDTH;
|
|
info->height = QSXGA_HEIGHT;
|
|
info->hflip = 0;
|
|
info->vflip = 0;
|
|
info->gain = 0;
|
|
|
|
info->tpf.numerator = 1;
|
|
info->tpf.denominator = 15; /* 30fps */
|
|
|
|
ret = sensor_write_array(sd, sensor_default_regs, ARRAY_SIZE(sensor_default_regs));
|
|
if(ret < 0) {
|
|
vfe_dev_err("write sensor_default_regs error\n");
|
|
return ret;
|
|
}
|
|
|
|
if(info->stby_mode == 0)
|
|
info->init_first_flag = 0;
|
|
|
|
info->preview_first_flag = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long sensor_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
|
|
{
|
|
int ret=0;
|
|
struct sensor_info *info = to_state(sd);
|
|
switch(cmd) {
|
|
case GET_CURRENT_WIN_CFG:
|
|
if(info->current_wins != NULL)
|
|
{
|
|
memcpy( arg,
|
|
info->current_wins,
|
|
sizeof(struct sensor_win_size) );
|
|
ret=0;
|
|
}
|
|
else
|
|
{
|
|
vfe_dev_err("empty wins!\n");
|
|
ret=-1;
|
|
}
|
|
break;
|
|
case SET_FPS:
|
|
break;
|
|
case ISP_SET_EXP_GAIN:
|
|
sensor_s_exp_gain(sd, (struct sensor_exp_gain *)arg);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
|
|
/*
|
|
* Store information about the video data format.
|
|
*/
|
|
static struct sensor_format_struct {
|
|
__u8 *desc;
|
|
//__u32 pixelformat;
|
|
enum v4l2_mbus_pixelcode mbus_code;
|
|
struct regval_list *regs;
|
|
int regs_size;
|
|
int bpp; /* Bytes per pixel */
|
|
}sensor_formats[] = {
|
|
{
|
|
.desc = "Raw RGB Bayer",
|
|
.mbus_code = V4L2_MBUS_FMT_SBGGR10_10X1,
|
|
.regs = sensor_fmt_raw,
|
|
.regs_size = ARRAY_SIZE(sensor_fmt_raw),
|
|
.bpp = 1
|
|
},
|
|
};
|
|
#define N_FMTS ARRAY_SIZE(sensor_formats)
|
|
|
|
/*
|
|
* Then there is the issue of window sizes. Try to capture the info here.
|
|
*/
|
|
|
|
static struct sensor_win_size sensor_win_sizes[] = {
|
|
/* qsxga: 2592*1936 */
|
|
{
|
|
.width = QSXGA_WIDTH,
|
|
.height = QSXGA_HEIGHT,
|
|
.hoffset = 0,
|
|
.voffset = 0,
|
|
.hts = 3912,//3557,//3912,//3424,
|
|
.vts = 2001,//2293,
|
|
.pclk = 96*1000*1000,
|
|
.fps_fixed = 1,
|
|
.bin_factor = 1,
|
|
.intg_min = 1<<4,
|
|
.intg_max = (2001)<<4,
|
|
.gain_min = 1<<4,
|
|
.gain_max = 15<<4,
|
|
.regs = sensor_qsxga_regs,
|
|
.regs_size = ARRAY_SIZE(sensor_qsxga_regs),
|
|
.set_size = NULL,
|
|
},
|
|
/* 1080P */
|
|
{
|
|
.width = HD1080_WIDTH,
|
|
.height = HD1080_HEIGHT,
|
|
.hoffset = 0,
|
|
.voffset = 0,
|
|
.hts = 2793,//3193
|
|
.vts = 1110,//1253,//1200,//1000,
|
|
.pclk = 96*1000*1000,
|
|
.fps_fixed = 1,
|
|
.bin_factor = 1,
|
|
.intg_min = 1<<4,
|
|
.intg_max = 1110<<4,
|
|
.gain_min = 1<<4,
|
|
.gain_max = 15<<4,
|
|
.regs = sensor_1080p_regs,//
|
|
.regs_size = ARRAY_SIZE(sensor_1080p_regs),//
|
|
.set_size = NULL,
|
|
},
|
|
/* SXGA */
|
|
{
|
|
.width = SXGA_WIDTH,
|
|
.height = SXGA_HEIGHT,
|
|
.hoffset = 0,
|
|
.voffset = 0,
|
|
.hts = 2800,//2244,
|
|
.vts = 1000,//1248,
|
|
.pclk = 84*1000*1000,
|
|
.fps_fixed = 1,
|
|
.bin_factor = 1,
|
|
.intg_min = 1<<4,
|
|
.intg_max = 1000<<4,
|
|
.gain_min = 1<<4,
|
|
.gain_max = 7<<4,
|
|
.regs = sensor_sxga_regs,
|
|
.regs_size = ARRAY_SIZE(sensor_sxga_regs),
|
|
.set_size = NULL,
|
|
},
|
|
/* VGA */
|
|
{
|
|
.width = VGA_WIDTH,
|
|
.height = VGA_HEIGHT,
|
|
.hoffset = 0,
|
|
.voffset = 0,
|
|
.hts = 2800,//2244,
|
|
.vts = 1000,//1248,
|
|
.pclk = 84*1000*1000,
|
|
.fps_fixed = 1,
|
|
.bin_factor = 1,
|
|
.intg_min = 1<<4,
|
|
.intg_max = 1000<<4,
|
|
.gain_min = 1<<4,
|
|
.gain_max = 7<<4,
|
|
.width_input = 1280,
|
|
.height_input = 960,
|
|
.regs = sensor_sxga_regs,
|
|
.regs_size = ARRAY_SIZE(sensor_sxga_regs),
|
|
.set_size = NULL,
|
|
},
|
|
|
|
};
|
|
|
|
#define N_WIN_SIZES (ARRAY_SIZE(sensor_win_sizes))
|
|
|
|
static int sensor_enum_fmt(struct v4l2_subdev *sd, unsigned index,
|
|
enum v4l2_mbus_pixelcode *code)
|
|
{
|
|
if (index >= N_FMTS)
|
|
return -EINVAL;
|
|
|
|
*code = sensor_formats[index].mbus_code;
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_enum_size(struct v4l2_subdev *sd,
|
|
struct v4l2_frmsizeenum *fsize)
|
|
{
|
|
if(fsize->index > N_WIN_SIZES-1)
|
|
return -EINVAL;
|
|
|
|
fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
|
|
fsize->discrete.width = sensor_win_sizes[fsize->index].width;
|
|
fsize->discrete.height = sensor_win_sizes[fsize->index].height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int sensor_try_fmt_internal(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *fmt,
|
|
struct sensor_format_struct **ret_fmt,
|
|
struct sensor_win_size **ret_wsize)
|
|
{
|
|
int index;
|
|
struct sensor_win_size *wsize;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
for (index = 0; index < N_FMTS; index++)
|
|
if (sensor_formats[index].mbus_code == fmt->code)
|
|
break;
|
|
|
|
if (index >= N_FMTS)
|
|
return -EINVAL;
|
|
|
|
if (ret_fmt != NULL)
|
|
*ret_fmt = sensor_formats + index;
|
|
|
|
/*
|
|
* Fields: the sensor devices claim to be progressive.
|
|
*/
|
|
|
|
fmt->field = V4L2_FIELD_NONE;
|
|
|
|
/*
|
|
* Round requested image size down to the nearest
|
|
* we support, but not below the smallest.
|
|
*/
|
|
for (wsize = sensor_win_sizes; wsize < sensor_win_sizes + N_WIN_SIZES; wsize++)
|
|
if (fmt->width >= wsize->width && fmt->height >= wsize->height)
|
|
break;
|
|
|
|
if (wsize >= sensor_win_sizes + N_WIN_SIZES)
|
|
wsize--; /* Take the smallest one */
|
|
if (ret_wsize != NULL)
|
|
*ret_wsize = wsize;
|
|
/*
|
|
* Note the size we'll actually handle.
|
|
*/
|
|
fmt->width = wsize->width;
|
|
fmt->height = wsize->height;
|
|
info->current_wins = wsize;
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_try_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
return sensor_try_fmt_internal(sd, fmt, NULL, NULL);
|
|
}
|
|
|
|
static int sensor_g_mbus_config(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_config *cfg)
|
|
{
|
|
cfg->type = V4L2_MBUS_CSI2;
|
|
cfg->flags = 0|V4L2_MBUS_CSI2_2_LANE|V4L2_MBUS_CSI2_CHANNEL_0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Set a format.
|
|
*/
|
|
static int sensor_s_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
int ret;
|
|
struct sensor_format_struct *sensor_fmt;
|
|
struct sensor_win_size *wsize;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
vfe_dev_dbg("sensor_s_fmt\n");
|
|
|
|
ret = sensor_try_fmt_internal(sd, fmt, &sensor_fmt, &wsize);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if(info->capture_mode == V4L2_MODE_VIDEO)
|
|
{
|
|
//video
|
|
}
|
|
else if(info->capture_mode == V4L2_MODE_IMAGE)
|
|
{
|
|
//image
|
|
}
|
|
|
|
sensor_write_array(sd, sensor_fmt->regs, sensor_fmt->regs_size);
|
|
|
|
ret = 0;
|
|
if (wsize->regs)
|
|
LOG_ERR_RET(sensor_write_array(sd, wsize->regs, wsize->regs_size))
|
|
|
|
if (wsize->set_size)
|
|
LOG_ERR_RET(wsize->set_size(sd))
|
|
|
|
info->fmt = sensor_fmt;
|
|
info->width = wsize->width;
|
|
info->height = wsize->height;
|
|
|
|
vfe_dev_print("s_fmt set width = %d, height = %d\n",wsize->width,wsize->height);
|
|
|
|
if(info->capture_mode == V4L2_MODE_VIDEO)
|
|
{
|
|
//video
|
|
}
|
|
else
|
|
{
|
|
//capture image
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Implement G/S_PARM. There is a "high quality" mode we could try
|
|
* to do someday; for now, we just do the frame rate tweak.
|
|
*/
|
|
static int sensor_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
|
|
{
|
|
struct v4l2_captureparm *cp = &parms->parm.capture;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
return -EINVAL;
|
|
|
|
memset(cp, 0, sizeof(struct v4l2_captureparm));
|
|
cp->capability = V4L2_CAP_TIMEPERFRAME;
|
|
cp->capturemode = info->capture_mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
|
|
{
|
|
struct v4l2_captureparm *cp = &parms->parm.capture;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
vfe_dev_dbg("sensor_s_parm\n");
|
|
|
|
if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
return -EINVAL;
|
|
|
|
if (info->tpf.numerator == 0)
|
|
return -EINVAL;
|
|
|
|
info->capture_mode = cp->capturemode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int sensor_queryctrl(struct v4l2_subdev *sd,
|
|
struct v4l2_queryctrl *qc)
|
|
{
|
|
/* Fill in min, max, step and default value for these controls. */
|
|
/* see include/linux/videodev2.h for details */
|
|
|
|
switch (qc->id) {
|
|
case V4L2_CID_GAIN:
|
|
return v4l2_ctrl_query_fill(qc, 1*16, 32*16, 1, 16);
|
|
case V4L2_CID_EXPOSURE:
|
|
return v4l2_ctrl_query_fill(qc, 0, 65535*16, 1, 0);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int sensor_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
{
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_GAIN:
|
|
return sensor_g_gain(sd, &ctrl->value);
|
|
case V4L2_CID_EXPOSURE:
|
|
return sensor_g_exp(sd, &ctrl->value);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int sensor_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
{
|
|
struct v4l2_queryctrl qc;
|
|
int ret;
|
|
|
|
qc.id = ctrl->id;
|
|
ret = sensor_queryctrl(sd, &qc);
|
|
if (ret < 0)
|
|
{
|
|
return ret;
|
|
}
|
|
|
|
if (ctrl->value < qc.minimum || ctrl->value > qc.maximum)
|
|
{
|
|
return -ERANGE;
|
|
}
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_GAIN:
|
|
return sensor_s_gain(sd, ctrl->value);
|
|
case V4L2_CID_EXPOSURE:
|
|
return sensor_s_exp(sd, ctrl->value);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
static int sensor_g_chip_ident(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_chip_ident *chip)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SENSOR, 0);
|
|
}
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static const struct v4l2_subdev_core_ops sensor_core_ops = {
|
|
.g_chip_ident = sensor_g_chip_ident,
|
|
.g_ctrl = sensor_g_ctrl,
|
|
.s_ctrl = sensor_s_ctrl,
|
|
.queryctrl = sensor_queryctrl,
|
|
.reset = sensor_reset,
|
|
.init = sensor_init,
|
|
.s_power = sensor_power,
|
|
.ioctl = sensor_ioctl,
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops sensor_video_ops = {
|
|
.enum_mbus_fmt = sensor_enum_fmt,
|
|
.enum_framesizes = sensor_enum_size,
|
|
.try_mbus_fmt = sensor_try_fmt,
|
|
.s_mbus_fmt = sensor_s_fmt,
|
|
.s_parm = sensor_s_parm,
|
|
.g_parm = sensor_g_parm,
|
|
.g_mbus_config = sensor_g_mbus_config,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops sensor_ops = {
|
|
.core = &sensor_core_ops,
|
|
.video = &sensor_video_ops,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
static struct cci_driver cci_drv = {
|
|
.name = SENSOR_NAME,
|
|
.addr_width = CCI_BITS_8,
|
|
.data_width = CCI_BITS_8,
|
|
};
|
|
|
|
static int sensor_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct v4l2_subdev *sd;
|
|
struct sensor_info *info;
|
|
|
|
info = kzalloc(sizeof(struct sensor_info), GFP_KERNEL);
|
|
if (info == NULL)
|
|
return -ENOMEM;
|
|
|
|
sd = &info->sd;
|
|
glb_sd = sd;
|
|
cci_dev_probe_helper(sd, client, &sensor_ops, &cci_drv);
|
|
|
|
info->fmt = &sensor_formats[0];
|
|
info->af_first_flag = 1;
|
|
info->init_first_flag = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int sensor_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd;
|
|
|
|
sd = cci_dev_remove_helper(client, &cci_drv);
|
|
kfree(to_state(sd));
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id sensor_id[] = {
|
|
{ SENSOR_NAME, 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, sensor_id);
|
|
|
|
|
|
static struct i2c_driver sensor_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = SENSOR_NAME,
|
|
},
|
|
.probe = sensor_probe,
|
|
.remove = sensor_remove,
|
|
.id_table = sensor_id,
|
|
};
|
|
static __init int init_sensor(void)
|
|
{
|
|
return cci_dev_init_helper(&sensor_driver);
|
|
}
|
|
|
|
static __exit void exit_sensor(void)
|
|
{
|
|
cci_dev_exit_helper(&sensor_driver);
|
|
}
|
|
|
|
module_init(init_sensor);
|
|
module_exit(exit_sensor);
|
|
|