1163 lines
24 KiB
C
Executable file
1163 lines
24 KiB
C
Executable file
/*
|
|
* A V4L2 driver for IMX214 cameras.
|
|
*
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/clk.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-chip-ident.h>
|
|
#include <media/v4l2-mediabus.h>
|
|
#include <linux/io.h>
|
|
#include "camera.h"
|
|
#include "sensor_helper.h"
|
|
|
|
MODULE_AUTHOR("lwj");
|
|
MODULE_DESCRIPTION("A low-level driver for IMX214 sensors");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
//for internel driver debug
|
|
#define DEV_DBG_EN 1
|
|
#if(DEV_DBG_EN == 1)
|
|
#define vfe_dev_dbg(x,arg...) printk("[IMX214]"x,##arg)
|
|
#else
|
|
#define vfe_dev_dbg(x,arg...)
|
|
#endif
|
|
#define vfe_dev_err(x,arg...) printk("[IMX214]"x,##arg)
|
|
#define vfe_dev_print(x,arg...) printk("[IMX214]"x,##arg)
|
|
|
|
#define LOG_ERR_RET(x) { \
|
|
int ret; \
|
|
ret = x; \
|
|
if(ret < 0) {\
|
|
vfe_dev_err("error at %s\n",__func__); \
|
|
return ret; \
|
|
} \
|
|
}
|
|
|
|
//define module timing
|
|
#define MCLK (24*1000*1000)
|
|
#define VREF_POL V4L2_MBUS_VSYNC_ACTIVE_LOW
|
|
#define HREF_POL V4L2_MBUS_HSYNC_ACTIVE_HIGH
|
|
#define CLK_POL V4L2_MBUS_PCLK_SAMPLE_RISING
|
|
#define V4L2_IDENT_SENSOR 0x0214
|
|
|
|
#define DGAIN_R 0x100
|
|
#define DGAIN_G 0x100
|
|
#define DGAIN_B 0x100
|
|
|
|
/*
|
|
* Our nominal (default) frame rate.
|
|
*/
|
|
|
|
#define SENSOR_FRAME_RATE 30
|
|
|
|
|
|
/*
|
|
* The IMX214 sits on i2c with ID 0x6c
|
|
*/
|
|
#define I2C_ADDR 0x20
|
|
#define SENSOR_NAME "imx214"
|
|
int imx214_sensor_vts;
|
|
|
|
|
|
//static struct delayed_work sensor_s_ae_ratio_work;
|
|
static struct v4l2_subdev *glb_sd;
|
|
|
|
/*
|
|
* Information we maintain about a known sensor.
|
|
*/
|
|
struct sensor_format_struct; /* coming later */
|
|
|
|
struct cfg_array { /* coming later */
|
|
struct regval_list * regs;
|
|
int size;
|
|
};
|
|
|
|
static inline struct sensor_info *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct sensor_info, sd);
|
|
}
|
|
|
|
|
|
/*
|
|
* The default register settings
|
|
*
|
|
*/
|
|
|
|
static struct regval_list sensor_default_regs[] = {
|
|
{0x0101,0x03},
|
|
{0x0105,0x01},
|
|
{0x0106,0x01},
|
|
{0x4550,0x02},
|
|
{0x4601,0x04},
|
|
{0x4642,0x01},
|
|
{0x6227,0x11},
|
|
{0x6276,0x00},
|
|
{0x900E,0x06},
|
|
{0xA802,0x90},
|
|
{0xA803,0x11},
|
|
{0xA804,0x62},
|
|
{0xA805,0x77},
|
|
{0xA806,0xAE},
|
|
{0xA807,0x34},
|
|
{0xA808,0xAE},
|
|
{0xA809,0x35},
|
|
{0xA80A,0x62},
|
|
{0xA80B,0x83},
|
|
{0xAE33,0x00},
|
|
{0x4174,0x00},
|
|
{0x4175,0x11},
|
|
{0x4612,0x29},
|
|
{0x461B,0x2C},
|
|
{0x461F,0x06},
|
|
{0x4635,0x07},
|
|
{0x4637,0x30},
|
|
{0x463F,0x18},
|
|
{0x4641,0x0D},
|
|
{0x465B,0x2C},
|
|
{0x465F,0x2B},
|
|
{0x4663,0x2B},
|
|
{0x4667,0x24},
|
|
{0x466F,0x24},
|
|
{0x470E,0x09},
|
|
{0x4909,0xAB},
|
|
{0x490B,0x95},
|
|
{0x4915,0x5D},
|
|
{0x4A5F,0xFF},
|
|
{0x4A61,0xFF},
|
|
{0x4A73,0x62},
|
|
{0x4A85,0x00},
|
|
{0x4A87,0xFF},
|
|
{0x583C,0x04},
|
|
{0x620E,0x04},
|
|
{0x6EB2,0x01},
|
|
{0x6EB3,0x00},
|
|
{0x9300,0x02},
|
|
{0x080b,119 },
|
|
{0x080d,55 },
|
|
{0x080f,103 },
|
|
{0x0811,55 },
|
|
{0x0813,55 },
|
|
{0x0815,55 },
|
|
{0x0817,223 },
|
|
{0x0819,47 },
|
|
{0x4601,0x04},
|
|
{0x4642,0x01},
|
|
{0x461B,0x2C},
|
|
{0x465B,0x2C},
|
|
{0x465F,0x2B},
|
|
{0x4663,0x2B},
|
|
{0x4667,0x24},
|
|
{0x466F,0x24},
|
|
};
|
|
|
|
//for capture
|
|
static struct regval_list sensor_13mega_regs[] = {
|
|
{0x0114, 0x03},
|
|
{0x0220, 0x00},
|
|
{0x0221, 0x11},
|
|
{0x0222, 0x01},
|
|
{0x0340, 0x0C},
|
|
{0x0341, 0x7A},
|
|
{0x0342, 0x13},
|
|
{0x0343, 0x90},
|
|
{0x0344, 0x00},
|
|
{0x0345, 0x00},
|
|
{0x0346, 0x00},
|
|
{0x0347, 0x00},
|
|
{0x0348, 0x10},
|
|
{0x0349, 0x6F},
|
|
{0x034A, 0x0C},
|
|
{0x034B, 0x2F},
|
|
{0x0381, 0x01},
|
|
{0x0383, 0x01},
|
|
{0x0385, 0x01},
|
|
{0x0387, 0x01},
|
|
{0x0900, 0x00},
|
|
{0x0901, 0x00},
|
|
{0x0902, 0x00},
|
|
{0x3000, 0x35},
|
|
{0x3054, 0x01},
|
|
{0x305C, 0x11},
|
|
{0x0112, 0x0A},
|
|
{0x0113, 0x0A},
|
|
{0x034C, 0x10},
|
|
{0x034D, 0x70},
|
|
{0x034E, 0x0C},
|
|
{0x034F, 0x30},
|
|
{0x0401, 0x00},
|
|
{0x0404, 0x00},
|
|
{0x0405, 0x10},
|
|
{0x0408, 0x00},
|
|
{0x0409, 0x00},
|
|
{0x040A, 0x00},
|
|
{0x040B, 0x00},
|
|
{0x040C, 0x10},
|
|
{0x040D, 0x70},
|
|
{0x040E, 0x0C},
|
|
{0x040F, 0x30},
|
|
{0x0301, 0x05},
|
|
{0x0303, 0x02},
|
|
{0x0305, 0x03},
|
|
{0x0306, 0x00},
|
|
{0x0307, 0x64},
|
|
{0x0309, 0x0A},
|
|
{0x030B, 0x01},
|
|
{0x0310, 0x00},
|
|
{0x0820, 0x0C},
|
|
{0x0821, 0x80},
|
|
{0x0822, 0x00},
|
|
{0x0823, 0x00},
|
|
{0x3A03, 0x08},
|
|
{0x3A04, 0xD0},
|
|
{0x3A05, 0x02},
|
|
{0x0B06, 0x01},
|
|
{0x30A2, 0x00},
|
|
{0x30B4, 0x00},
|
|
{0x3A02, 0xFF},
|
|
{0x3011, 0x00},
|
|
{0x3013, 0x01},
|
|
{0x0202, 0x0C},
|
|
{0x0203, 0x70},
|
|
{0x0224, 0x01},
|
|
{0x0225, 0xF4},
|
|
{0x0204, 0x00},
|
|
{0x0205, 0x00},
|
|
{0x020E, 0x01},
|
|
{0x020F, 0x00},
|
|
{0x0210, 0x01},
|
|
{0x0211, 0x00},
|
|
{0x0212, 0x01},
|
|
{0x0213, 0x00},
|
|
{0x0214, 0x01},
|
|
{0x0215, 0x00},
|
|
{0x0216, 0x00},
|
|
{0x0217, 0x00},
|
|
{0x4170, 0x00},
|
|
{0x4171, 0x10},
|
|
{0x4176, 0x00},
|
|
{0x4177, 0x3C},
|
|
{0xAE20, 0x04},
|
|
{0xAE21, 0x5C},
|
|
{0x0138, 0x01},
|
|
{0x0100, 0x01},
|
|
};
|
|
|
|
//for video
|
|
static struct regval_list sensor_4k_videos[]=
|
|
{
|
|
{0x0114, 0x03},
|
|
{0x0220, 0x00},
|
|
{0x0221, 0x11},
|
|
{0x0222, 0x01},
|
|
{0x0340, 0x09},
|
|
{0x0341, 0x3C},
|
|
{0x0342, 0x13},
|
|
{0x0343, 0x90},
|
|
{0x0344, 0x00},
|
|
{0x0345, 0xB8},
|
|
{0x0346, 0x01},
|
|
{0x0347, 0xE0},
|
|
{0x0348, 0x0F},
|
|
{0x0349, 0xB7},
|
|
{0x034A, 0x0A},
|
|
{0x034B, 0x4F},
|
|
{0x0381, 0x01},
|
|
{0x0383, 0x01},
|
|
{0x0385, 0x01},
|
|
{0x0387, 0x01},
|
|
{0x0900, 0x00},
|
|
{0x0901, 0x00},
|
|
{0x0902, 0x00},
|
|
{0x3000, 0x35},
|
|
{0x3054, 0x01},
|
|
{0x305C, 0x11},
|
|
{0x0112, 0x0A},
|
|
{0x0113, 0x0A},
|
|
{0x034C, 0x0F},
|
|
{0x034D, 0x00},
|
|
{0x034E, 0x08},
|
|
{0x034F, 0x70},
|
|
{0x0401, 0x00},
|
|
{0x0404, 0x00},
|
|
{0x0405, 0x10},
|
|
{0x0408, 0x00},
|
|
{0x0409, 0x00},
|
|
{0x040A, 0x00},
|
|
{0x040B, 0x00},
|
|
{0x040C, 0x0F},
|
|
{0x040D, 0x00},
|
|
{0x040E, 0x08},
|
|
{0x040F, 0x70},
|
|
{0x0301, 0x05},
|
|
{0x0303, 0x02},
|
|
{0x0305, 0x01},
|
|
{0x0306, 0x00},
|
|
{0x0307, 0x25},
|
|
{0x0309, 0x0A},
|
|
{0x030B, 0x01},
|
|
{0x0310, 0x00},
|
|
{0x0820, 0x0D},
|
|
{0x0821, 0xE0},
|
|
{0x0822, 0x00},
|
|
{0x0823, 0x00},
|
|
{0x3A03, 0x09},
|
|
{0x3A04, 0xA0},
|
|
{0x3A05, 0x04},
|
|
{0x0B06, 0x01},
|
|
{0x30A2, 0x00},
|
|
{0x30B4, 0x00},
|
|
{0x3A02, 0xFF},
|
|
{0x3011, 0x00},
|
|
{0x3013, 0x01},
|
|
{0x0202, 0x09},
|
|
{0x0203, 0x32},
|
|
{0x0224, 0x01},
|
|
{0x0225, 0xF4},
|
|
{0x0204, 0x00},
|
|
{0x0205, 0x00},
|
|
{0x020E, 0x01},
|
|
{0x020F, 0x00},
|
|
{0x0210, 0x01},
|
|
{0x0211, 0x00},
|
|
{0x0212, 0x01},
|
|
{0x0213, 0x00},
|
|
{0x0214, 0x01},
|
|
{0x0215, 0x00},
|
|
{0x0216, 0x00},
|
|
{0x0217, 0x00},
|
|
{0x4170, 0x00},
|
|
{0x4171, 0x10},
|
|
{0x4176, 0x00},
|
|
{0x4177, 0x3C},
|
|
{0xAE20, 0x04},
|
|
{0xAE21, 0x5C},
|
|
};
|
|
|
|
static struct regval_list sensor_1080p_regs[] = {
|
|
{0x0114,0x03},
|
|
{0x0220,0x00},
|
|
{0x0221,0x11},
|
|
{0x0222,0x01},
|
|
{0x0340,0x08},
|
|
{0x0341,0x50},
|
|
{0x0342,0x13},
|
|
{0x0343,0x90},
|
|
{0x0344,0x00},
|
|
{0x0345,0xB8},
|
|
{0x0346,0x01},
|
|
{0x0347,0xE0},
|
|
{0x0348,0x0F},
|
|
{0x0349,0xB7},
|
|
{0x034A,0x0A},
|
|
{0x034B,0x4F},
|
|
{0x0381,0x01},
|
|
{0x0383,0x01},
|
|
{0x0385,0x01},
|
|
{0x0387,0x01},
|
|
{0x0900,0x01},
|
|
{0x0901,0x22},
|
|
{0x0902,0x02},
|
|
{0x3000,0x35},
|
|
{0x3054,0x01},
|
|
{0x305C,0x11},
|
|
{0x0112,0x0A},
|
|
{0x0113,0x0A},
|
|
{0x034C,0x07},
|
|
{0x034D,0x80},
|
|
{0x034E,0x04},
|
|
{0x034F,0x38},
|
|
{0x0401,0x00},
|
|
{0x0404,0x00},
|
|
{0x0405,0x10},
|
|
{0x0408,0x00},
|
|
{0x0409,0x00},
|
|
{0x040A,0x00},
|
|
{0x040B,0x00},
|
|
{0x040C,0x07},
|
|
{0x040D,0x80},
|
|
{0x040E,0x04},
|
|
{0x040F,0x38},
|
|
{0x0301,0x05},
|
|
{0x0303,0x02},
|
|
{0x0305,0x03},
|
|
{0x0306,0x00},
|
|
{0x0307,0x64},
|
|
{0x0309,0x0A},
|
|
{0x030B,0x01},
|
|
{0x0310,0x00},
|
|
{0x0820,0x0C},
|
|
{0x0821,0x80},
|
|
{0x0822,0x00},
|
|
{0x0823,0x00},
|
|
{0x3A03,0x06},
|
|
{0x3A04,0x28},
|
|
{0x3A05,0x04},
|
|
{0x0B06,0x01},
|
|
{0x30A2,0x00},
|
|
{0x30B4,0x00},
|
|
{0x3A02,0xFF},
|
|
{0x3011,0x00},
|
|
{0x3013,0x01},
|
|
{0x0202,0x08},
|
|
{0x0203,0x46},
|
|
{0x0224,0x01},
|
|
{0x0225,0xF4},
|
|
{0x0204,0x00},
|
|
{0x0205,0x00},
|
|
{0x020E,0x01},
|
|
{0x020F,0x00},
|
|
{0x0210,0x01},
|
|
{0x0211,0x00},
|
|
{0x0212,0x01},
|
|
{0x0213,0x00},
|
|
{0x0214,0x01},
|
|
{0x0215,0x00},
|
|
{0x0216,0x00},
|
|
{0x0217,0x00},
|
|
{0x4170,0x00},
|
|
{0x4171,0x10},
|
|
{0x4176,0x00},
|
|
{0x4177,0x3C},
|
|
{0xAE20,0x04},
|
|
{0xAE21,0x5C},
|
|
{0x0138, 0x01},
|
|
{0x0100, 0x01},
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
* Here we'll try to encapsulate the changes for just the output
|
|
* video format.
|
|
*
|
|
*/
|
|
|
|
static struct regval_list sensor_fmt_raw[] = {
|
|
};
|
|
|
|
|
|
static int sensor_g_exp(struct v4l2_subdev *sd, __s32 *value)
|
|
{
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
*value = info->exp;
|
|
vfe_dev_dbg("sensor_get_exposure = %d\n", info->exp);
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_s_exp(struct v4l2_subdev *sd, unsigned int exp_val)
|
|
{
|
|
unsigned char explow,exphigh;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
if(exp_val>0xffffff)
|
|
exp_val=0xfffff0;
|
|
if(exp_val<16)
|
|
exp_val=16;
|
|
|
|
exp_val=(exp_val+8)>>4;//rounding to 1
|
|
|
|
exphigh = (unsigned char) ( (0xff00&exp_val)>>8);
|
|
explow = (unsigned char) ( (0x00ff&exp_val) );
|
|
|
|
sensor_write(sd, 0x0203, explow);//coarse integration time
|
|
sensor_write(sd, 0x0202, exphigh);
|
|
|
|
info->exp = exp_val;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int sensor_g_gain(struct v4l2_subdev *sd, __s32 *value)
|
|
{
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
*value = info->gain;
|
|
vfe_dev_dbg("sensor_get_gain = %d\n", info->gain);
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_s_gain(struct v4l2_subdev *sd, int gain_val)
|
|
{
|
|
struct sensor_info *info = to_state(sd);
|
|
unsigned char gainlow = 0;
|
|
unsigned char gainhigh = 0;
|
|
int gainana = 512 - 8192/gain_val;
|
|
|
|
gainlow=(unsigned char)(gainana&0xff);
|
|
gainhigh=(unsigned char)((gainana>>8)&0xff);
|
|
|
|
sensor_write(sd, 0x0205, gainlow);
|
|
sensor_write(sd, 0x0204, gainhigh);
|
|
|
|
info->gain = gain_val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_s_exp_gain(struct v4l2_subdev *sd, struct sensor_exp_gain *exp_gain)
|
|
{
|
|
int exp_val, gain_val,shutter,frame_length;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
exp_val = exp_gain->exp_val;
|
|
gain_val = exp_gain->gain_val;
|
|
|
|
if(gain_val<1*16)
|
|
gain_val=16;
|
|
if(gain_val>64*16-1)
|
|
gain_val=64*16-1;
|
|
|
|
if(exp_val>0xfffff)
|
|
exp_val=0xfffff;
|
|
|
|
shutter = exp_val/16;
|
|
if(shutter > imx214_sensor_vts)
|
|
frame_length = shutter;
|
|
else
|
|
frame_length = imx214_sensor_vts;
|
|
|
|
// sensor_write(sd, 0x0341, (frame_length & 0xff));
|
|
// sensor_write(sd, 0x0340, (frame_length >> 8));
|
|
|
|
sensor_write(sd,0x0104,0x01);
|
|
sensor_s_exp(sd,exp_val);
|
|
sensor_s_gain(sd,gain_val);
|
|
sensor_write(sd,0x0104,0x00);
|
|
|
|
if (gain_val > 64)
|
|
{
|
|
sensor_write(sd,0x30a2, 0x03); //enable LNR CNR
|
|
sensor_write(sd,0x9706, (gain_val-64)/12); //LNR 0x00~0x10
|
|
sensor_write(sd,0x9e25, (gain_val-64)); //CNR 0x00~0x8c
|
|
}
|
|
else
|
|
{
|
|
sensor_write(sd,0x30a2,0x00);
|
|
}
|
|
|
|
info->exp = exp_val;
|
|
info->gain = gain_val;
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Stuff that knows about the sensor.
|
|
*/
|
|
|
|
static int sensor_power(struct v4l2_subdev *sd, int on)
|
|
{
|
|
int ret;
|
|
|
|
ret = 0;
|
|
switch(on)
|
|
{
|
|
case CSI_SUBDEV_STBY_ON:
|
|
vfe_dev_dbg("CSI_SUBDEV_STBY_ON!\n");
|
|
cci_lock(sd);
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_LOW);
|
|
cci_unlock(sd);
|
|
vfe_set_mclk(sd,OFF);
|
|
break;
|
|
case CSI_SUBDEV_STBY_OFF:
|
|
vfe_dev_dbg("CSI_SUBDEV_STBY_OFF!\n");
|
|
cci_lock(sd);
|
|
vfe_set_mclk_freq(sd,MCLK);
|
|
vfe_set_mclk(sd,ON);
|
|
msleep(20);
|
|
cci_unlock(sd);
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_HIGH);
|
|
break;
|
|
case CSI_SUBDEV_PWR_ON:
|
|
vfe_dev_dbg("CSI_SUBDEV_PWR_ON!\n");
|
|
cci_lock(sd);
|
|
vfe_gpio_set_status(sd,PWDN,1);//set the gpio to output
|
|
vfe_gpio_set_status(sd,RESET,1);//set the gpio to output
|
|
vfe_gpio_write(sd,PWDN,CSI_GPIO_LOW);
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_LOW);
|
|
usleep_range(1000,1200);
|
|
vfe_set_mclk_freq(sd,MCLK);
|
|
vfe_set_mclk(sd,ON);
|
|
usleep_range(10000,12000);
|
|
vfe_gpio_write(sd,POWER_EN,CSI_GPIO_HIGH);
|
|
vfe_set_pmu_channel(sd,IOVDD,ON);
|
|
vfe_set_pmu_channel(sd,AVDD,ON);
|
|
vfe_set_pmu_channel(sd,DVDD,ON);
|
|
vfe_set_pmu_channel(sd,AFVDD,ON);
|
|
usleep_range(10000,12000);
|
|
vfe_gpio_write(sd,PWDN,CSI_GPIO_HIGH);
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_HIGH);
|
|
|
|
usleep_range(30000,31000);
|
|
cci_unlock(sd);
|
|
break;
|
|
case CSI_SUBDEV_PWR_OFF:
|
|
vfe_dev_dbg("CSI_SUBDEV_PWR_OFF!\n");
|
|
cci_lock(sd);
|
|
vfe_set_mclk(sd,OFF);
|
|
vfe_gpio_write(sd,POWER_EN,CSI_GPIO_LOW);
|
|
vfe_set_pmu_channel(sd,AFVDD,OFF);
|
|
vfe_set_pmu_channel(sd,DVDD,OFF);
|
|
vfe_set_pmu_channel(sd,AVDD,OFF);
|
|
vfe_set_pmu_channel(sd,IOVDD,OFF);
|
|
usleep_range(10000,12000);
|
|
vfe_gpio_write(sd,PWDN,CSI_GPIO_LOW);
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_LOW);
|
|
|
|
vfe_gpio_set_status(sd,RESET,0);//set the gpio to input
|
|
vfe_gpio_set_status(sd,PWDN,0);//set the gpio to input
|
|
cci_unlock(sd);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_reset(struct v4l2_subdev *sd, u32 val)
|
|
{
|
|
switch(val)
|
|
{
|
|
case 0:
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_HIGH);
|
|
usleep_range(10000,12000);
|
|
break;
|
|
case 1:
|
|
vfe_gpio_write(sd,RESET,CSI_GPIO_LOW);
|
|
usleep_range(10000,12000);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_detect(struct v4l2_subdev *sd)
|
|
{
|
|
data_type rdval;
|
|
|
|
LOG_ERR_RET(sensor_read(sd, 0x0000, &rdval))
|
|
// if((rdval&0x0f) != 0x02)
|
|
// return -ENODEV;
|
|
|
|
LOG_ERR_RET(sensor_read(sd, 0x0001, &rdval))
|
|
// if(rdval != 0x14)
|
|
// return -ENODEV;
|
|
printk("find the sony IMX214 ***********\n");
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_init(struct v4l2_subdev *sd, u32 val)
|
|
{
|
|
int ret;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
vfe_dev_dbg("sensor_init\n");
|
|
|
|
/*Make sure it is a target sensor*/
|
|
ret = sensor_detect(sd);
|
|
if (ret) {
|
|
vfe_dev_err("chip found is not an target chip.\n");
|
|
return ret;
|
|
}
|
|
|
|
vfe_get_standby_mode(sd,&info->stby_mode);
|
|
|
|
if((info->stby_mode == HW_STBY || info->stby_mode == SW_STBY) \
|
|
&& info->init_first_flag == 0) {
|
|
vfe_dev_print("stby_mode and init_first_flag = 0\n");
|
|
return 0;
|
|
}
|
|
|
|
info->focus_status = 0;
|
|
info->low_speed = 0;
|
|
info->width = 4208;
|
|
info->height = 3120;
|
|
info->hflip = 0;
|
|
info->vflip = 0;
|
|
info->gain = 0;
|
|
|
|
info->tpf.numerator = 1;
|
|
info->tpf.denominator = 30; /* 30fps */
|
|
|
|
ret = sensor_write_array(sd, sensor_default_regs, ARRAY_SIZE(sensor_default_regs));
|
|
if(ret < 0) {
|
|
vfe_dev_err("write sensor_default_regs error\n");
|
|
return ret;
|
|
}
|
|
|
|
if(info->stby_mode == 0)
|
|
info->init_first_flag = 0;
|
|
|
|
info->preview_first_flag = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long sensor_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
|
|
{
|
|
int ret=0;
|
|
struct sensor_info *info = to_state(sd);
|
|
switch(cmd) {
|
|
case GET_CURRENT_WIN_CFG:
|
|
if(info->current_wins != NULL)
|
|
{
|
|
memcpy( arg,
|
|
info->current_wins,
|
|
sizeof(struct sensor_win_size) );
|
|
ret=0;
|
|
}
|
|
else
|
|
{
|
|
vfe_dev_err("empty wins!\n");
|
|
ret=-1;
|
|
}
|
|
break;
|
|
case SET_FPS:
|
|
break;
|
|
case ISP_SET_EXP_GAIN:
|
|
ret = sensor_s_exp_gain(sd, (struct sensor_exp_gain *)arg);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
|
|
/*
|
|
* Store information about the video data format.
|
|
*/
|
|
static struct sensor_format_struct {
|
|
__u8 *desc;
|
|
//__u32 pixelformat;
|
|
enum v4l2_mbus_pixelcode mbus_code;
|
|
struct regval_list *regs;
|
|
int regs_size;
|
|
int bpp; /* Bytes per pixel */
|
|
}sensor_formats[] = {
|
|
{
|
|
.desc = "Raw RGB Bayer",
|
|
.mbus_code = V4L2_MBUS_FMT_SBGGR10_10X1,
|
|
.regs = sensor_fmt_raw,
|
|
.regs_size = ARRAY_SIZE(sensor_fmt_raw),
|
|
.bpp = 1
|
|
},
|
|
};
|
|
#define N_FMTS ARRAY_SIZE(sensor_formats)
|
|
|
|
|
|
|
|
/*
|
|
* Then there is the issue of window sizes. Try to capture the info here.
|
|
*/
|
|
|
|
|
|
static struct sensor_win_size sensor_win_sizes[] = {
|
|
#if 1
|
|
/* Fullsize: 4208*3120 */
|
|
{
|
|
.width = 4208,
|
|
.height = 3120,
|
|
.hoffset = 0,
|
|
.voffset = 0,
|
|
.hts = 5008,
|
|
.vts = 3194,
|
|
.pclk = 320*1000*1000,
|
|
.mipi_bps = 800*1000*1000,
|
|
.fps_fixed = 2,
|
|
.bin_factor = 1,
|
|
.intg_min = 16,
|
|
.intg_max = (3194-10)<<4,
|
|
.gain_min = 16,
|
|
.gain_max = (16<<4),
|
|
.regs = sensor_13mega_regs,
|
|
.regs_size = ARRAY_SIZE(sensor_13mega_regs),
|
|
.set_size = NULL,
|
|
},
|
|
#endif
|
|
#if 1
|
|
/*4k video*/
|
|
{
|
|
.width = 3840,
|
|
.height = 2160,
|
|
.hoffset = 0,//(4096-3840)>>1,
|
|
.voffset = 0,
|
|
.hts = 5008,
|
|
.vts = 2362,//2200,
|
|
.pclk = 355*1000*1000,//320
|
|
.mipi_bps = 888*1000*1000,//800
|
|
.fps_fixed = 2,
|
|
.bin_factor = 1,
|
|
.intg_min = 16,
|
|
.intg_max = (2362-10)<<4,
|
|
.gain_min = 16,
|
|
.gain_max = (16<<4),
|
|
.regs = sensor_4k_videos,
|
|
.regs_size = ARRAY_SIZE(sensor_4k_videos),
|
|
.set_size = NULL,
|
|
},
|
|
|
|
/* 1080p */
|
|
{
|
|
.width = 1920,
|
|
.height = 1080,
|
|
.hoffset = 0,
|
|
.voffset = 0,
|
|
.hts = 5008,
|
|
.vts = 2128,
|
|
.pclk = 320*1000*1000,
|
|
.mipi_bps = 800*1000*1000,
|
|
.fps_fixed = 1,
|
|
.bin_factor = 1,
|
|
.intg_min = 16,
|
|
.intg_max = (2128-10)<<4,
|
|
.gain_min = 16,
|
|
.gain_max = (16<<4),
|
|
.regs = sensor_1080p_regs,
|
|
.regs_size = ARRAY_SIZE(sensor_1080p_regs),
|
|
.set_size = NULL,
|
|
},
|
|
#endif
|
|
|
|
};
|
|
|
|
#define N_WIN_SIZES (ARRAY_SIZE(sensor_win_sizes))
|
|
|
|
static int sensor_enum_fmt(struct v4l2_subdev *sd, unsigned index,
|
|
enum v4l2_mbus_pixelcode *code)
|
|
{
|
|
if (index >= N_FMTS)
|
|
return -EINVAL;
|
|
|
|
*code = sensor_formats[index].mbus_code;
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_enum_size(struct v4l2_subdev *sd,
|
|
struct v4l2_frmsizeenum *fsize)
|
|
{
|
|
if(fsize->index > N_WIN_SIZES-1)
|
|
return -EINVAL;
|
|
|
|
fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
|
|
fsize->discrete.width = sensor_win_sizes[fsize->index].width;
|
|
fsize->discrete.height = sensor_win_sizes[fsize->index].height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int sensor_try_fmt_internal(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *fmt,
|
|
struct sensor_format_struct **ret_fmt,
|
|
struct sensor_win_size **ret_wsize)
|
|
{
|
|
int index;
|
|
struct sensor_win_size *wsize;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
for (index = 0; index < N_FMTS; index++)
|
|
if (sensor_formats[index].mbus_code == fmt->code)
|
|
break;
|
|
|
|
if (index >= N_FMTS)
|
|
return -EINVAL;
|
|
|
|
if (ret_fmt != NULL)
|
|
*ret_fmt = sensor_formats + index;
|
|
|
|
/*
|
|
* Fields: the sensor devices claim to be progressive.
|
|
*/
|
|
fmt->field = V4L2_FIELD_NONE;
|
|
|
|
/*
|
|
* Round requested image size down to the nearest
|
|
* we support, but not below the smallest.
|
|
*/
|
|
for (wsize = sensor_win_sizes; wsize < sensor_win_sizes + N_WIN_SIZES; wsize++)
|
|
if (fmt->width >= wsize->width && fmt->height >= wsize->height)
|
|
break;
|
|
|
|
if (wsize >= sensor_win_sizes + N_WIN_SIZES)
|
|
wsize--; /* Take the smallest one */
|
|
if (ret_wsize != NULL)
|
|
*ret_wsize = wsize;
|
|
/*
|
|
* Note the size we'll actually handle.
|
|
*/
|
|
fmt->width = wsize->width;
|
|
fmt->height = wsize->height;
|
|
info->current_wins = wsize;
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_try_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
return sensor_try_fmt_internal(sd, fmt, NULL, NULL);
|
|
}
|
|
|
|
static int sensor_g_mbus_config(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_config *cfg)
|
|
{
|
|
cfg->type = V4L2_MBUS_CSI2;
|
|
cfg->flags = 0|V4L2_MBUS_CSI2_4_LANE|V4L2_MBUS_CSI2_CHANNEL_0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Set a format.
|
|
*/
|
|
static int sensor_s_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
int ret;
|
|
struct sensor_format_struct *sensor_fmt;
|
|
struct sensor_win_size *wsize;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
vfe_dev_dbg("sensor_s_fmt\n");
|
|
|
|
ret = sensor_try_fmt_internal(sd, fmt, &sensor_fmt, &wsize);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if(info->capture_mode == V4L2_MODE_VIDEO)
|
|
{
|
|
//video
|
|
}
|
|
else if(info->capture_mode == V4L2_MODE_IMAGE)
|
|
{
|
|
//image
|
|
}
|
|
|
|
sensor_write_array(sd, sensor_fmt->regs, sensor_fmt->regs_size);
|
|
|
|
ret = 0;
|
|
if (wsize->regs)
|
|
LOG_ERR_RET(sensor_write_array(sd, wsize->regs, wsize->regs_size))
|
|
|
|
if (wsize->set_size)
|
|
LOG_ERR_RET(wsize->set_size(sd))
|
|
|
|
info->fmt = sensor_fmt;
|
|
info->width = wsize->width;
|
|
info->height = wsize->height;
|
|
imx214_sensor_vts = wsize->vts;
|
|
|
|
vfe_dev_print("s_fmt set width = %d, height = %d\n",wsize->width,wsize->height);
|
|
|
|
if(info->capture_mode == V4L2_MODE_VIDEO)
|
|
{
|
|
//video
|
|
} else {
|
|
//capture image
|
|
}
|
|
|
|
vfe_dev_print("s_fmt end\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Implement G/S_PARM. There is a "high quality" mode we could try
|
|
* to do someday; for now, we just do the frame rate tweak.
|
|
*/
|
|
static int sensor_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
|
|
{
|
|
struct v4l2_captureparm *cp = &parms->parm.capture;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
return -EINVAL;
|
|
|
|
memset(cp, 0, sizeof(struct v4l2_captureparm));
|
|
cp->capability = V4L2_CAP_TIMEPERFRAME;
|
|
cp->capturemode = info->capture_mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sensor_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
|
|
{
|
|
struct v4l2_captureparm *cp = &parms->parm.capture;
|
|
struct sensor_info *info = to_state(sd);
|
|
|
|
vfe_dev_dbg("sensor_s_parm\n");
|
|
|
|
if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
return -EINVAL;
|
|
|
|
if (info->tpf.numerator == 0)
|
|
return -EINVAL;
|
|
|
|
info->capture_mode = cp->capturemode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int sensor_queryctrl(struct v4l2_subdev *sd,
|
|
struct v4l2_queryctrl *qc)
|
|
{
|
|
/* Fill in min, max, step and default value for these controls. */
|
|
/* see include/linux/videodev2.h for details */
|
|
|
|
switch (qc->id) {
|
|
case V4L2_CID_GAIN:
|
|
return v4l2_ctrl_query_fill(qc, 1*16, 64*16-1, 1, 1*16);
|
|
case V4L2_CID_EXPOSURE:
|
|
return v4l2_ctrl_query_fill(qc, 0, 65535*16, 1, 0);
|
|
case V4L2_CID_FRAME_RATE:
|
|
return v4l2_ctrl_query_fill(qc, 15, 120, 1, 120);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int sensor_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
{
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_GAIN:
|
|
return sensor_g_gain(sd, &ctrl->value);
|
|
case V4L2_CID_EXPOSURE:
|
|
return sensor_g_exp(sd, &ctrl->value);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int sensor_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
{
|
|
struct v4l2_queryctrl qc;
|
|
int ret;
|
|
|
|
qc.id = ctrl->id;
|
|
ret = sensor_queryctrl(sd, &qc);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
if (ctrl->value < qc.minimum || ctrl->value > qc.maximum) {
|
|
vfe_dev_err("max gain qurery is %d,min gain qurey is %d\n",qc.maximum,qc.minimum);
|
|
return -ERANGE;
|
|
}
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_GAIN:
|
|
return sensor_s_gain(sd, ctrl->value);
|
|
case V4L2_CID_EXPOSURE:
|
|
return sensor_s_exp(sd, ctrl->value);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
static int sensor_g_chip_ident(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_chip_ident *chip)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SENSOR, 0);
|
|
}
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static const struct v4l2_subdev_core_ops sensor_core_ops = {
|
|
.g_chip_ident = sensor_g_chip_ident,
|
|
.g_ctrl = sensor_g_ctrl,
|
|
.s_ctrl = sensor_s_ctrl,
|
|
.queryctrl = sensor_queryctrl,
|
|
.reset = sensor_reset,
|
|
.init = sensor_init,
|
|
.s_power = sensor_power,
|
|
.ioctl = sensor_ioctl,
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops sensor_video_ops = {
|
|
.enum_mbus_fmt = sensor_enum_fmt,
|
|
.enum_framesizes = sensor_enum_size,
|
|
.try_mbus_fmt = sensor_try_fmt,
|
|
.s_mbus_fmt = sensor_s_fmt,
|
|
.s_parm = sensor_s_parm,
|
|
.g_parm = sensor_g_parm,
|
|
.g_mbus_config = sensor_g_mbus_config,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops sensor_ops = {
|
|
.core = &sensor_core_ops,
|
|
.video = &sensor_video_ops,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
static struct cci_driver cci_drv = {
|
|
.name = SENSOR_NAME,
|
|
.addr_width = CCI_BITS_16,
|
|
.data_width = CCI_BITS_8,
|
|
};
|
|
|
|
static int sensor_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct v4l2_subdev *sd;
|
|
struct sensor_info *info;
|
|
info = kzalloc(sizeof(struct sensor_info), GFP_KERNEL);
|
|
if (info == NULL)
|
|
return -ENOMEM;
|
|
sd = &info->sd;
|
|
glb_sd = sd;
|
|
cci_dev_probe_helper(sd, client, &sensor_ops, &cci_drv);
|
|
|
|
info->fmt = &sensor_formats[0];
|
|
info->af_first_flag = 1;
|
|
info->init_first_flag = 1;
|
|
|
|
return 0;
|
|
}
|
|
static int sensor_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd;
|
|
sd = cci_dev_remove_helper(client, &cci_drv);
|
|
kfree(to_state(sd));
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id sensor_id[] = {
|
|
{SENSOR_NAME, 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, sensor_id);
|
|
|
|
|
|
static struct i2c_driver sensor_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = SENSOR_NAME,
|
|
},
|
|
.probe = sensor_probe,
|
|
.remove = sensor_remove,
|
|
.id_table = sensor_id,
|
|
};
|
|
static __init int init_sensor(void)
|
|
{
|
|
return cci_dev_init_helper(&sensor_driver);
|
|
}
|
|
|
|
static __exit void exit_sensor(void)
|
|
{
|
|
cci_dev_exit_helper(&sensor_driver);
|
|
}
|
|
|
|
module_init(init_sensor);
|
|
module_exit(exit_sensor);
|
|
|